Skip to content

Best picks

Best Low Profile Robot Vacuums

Will They Fit Under Your Furniture?

Find a low profile robot vacuum for your furniture gap. Compare eufy, Saros 10, 10R and Qrevo Slim heights, sensor states, dock space and operating limits.

By thisSWEEP EditorialUpdated November 3, 20268 min read4 picks

On this page · The short answer

The short answer

#2

eufy 11S MAX

Choose
The tightest gaps on this shortlist; remote operation
Check
The manual identifies infrared and drop sensors; eufy describes bounce navigation and button or remote operation without Wi-Fi setup.
#3

Saros 10

Choose
Retractable navigation and a vibrating mop
Check
Both Saros models share the lowest published height; the “R” does not mean a taller version.
More picks (1)
  1. 4

    Another low robot with mop washing and drying

    Qrevo Slim

    Choose for: Another low robot with mop washing and drying

    Check before buying: We could not establish a separate minimum US under-furniture operating gap from the reviewed support specifications and manual.

The best low profile robot vacuum starts with your lowest usable furniture gap: our mapped vacuum-and-mop starting pick is the Roborock Saros 10R, with a published 79.8 mm profile. For tighter spaces, the eufy RoboVac 11S MAX has the shortest body here at 2.85 inches, approximately 72.4 mm, but its stated minimum passage is 73 mm. Measure first: body height alone does not confirm operating clearance.

Quick picks and comparison

Compare specifications and all conditions

Saros 10R

Published height
79.8 mm
Navigation or height state
Solid-state 3D ToF; lifting chassis
Minimum under-furniture operating gap
Not established in reviewed sources
All specifications
Choose it for
Mapped vacuuming and rotating-pad mopping

eufy 11S MAX

Published height
2.85 in, about 72.4 mm
Navigation or height state
Infrared sensors; bounce navigation
Minimum under-furniture operating gap
2.87 in / 73 mm
All specifications
Choose it for
The tightest gaps on this shortlist; remote operation

Saros 10

Published height
79.8 mm lowered; 93.5 mm sensor elevated
Navigation or height state
Retractable LDS; lifting chassis
Minimum under-furniture operating gap
Not established separately from dimensions
All specifications
Choose it for
Retractable navigation and a vibrating mop

Qrevo Slim

Published height
8.2 cm
Navigation or height state
Solid-state 3D ToF
Minimum under-furniture operating gap
Not established in reviewed sources
All specifications
Choose it for
Another low robot with mop washing and drying
Full comparison table

Swipe to compare. Row labels stay visible.

PickPublished heightNavigation or height stateMinimum under-furniture operating gapChoose it for
Saros 10R79.8 mmSolid-state 3D ToF; lifting chassisNot established in reviewed sourcesMapped vacuuming and rotating-pad mopping
eufy 11S MAX2.85 in, about 72.4 mmInfrared sensors; bounce navigation2.87 in / 73 mmThe tightest gaps on this shortlist; remote operation
Saros 1079.8 mm lowered; 93.5 mm sensor elevatedRetractable LDS; lifting chassisNot established separately from dimensionsRetractable navigation and a vibrating mop
Qrevo Slim8.2 cmSolid-state 3D ToFNot established in reviewed sourcesAnother low robot with mop washing and drying
PickPublished heightNavigation or height stateMinimum under-furniture operating gapChoose it for
Saros 10R79.8 mmSolid-state 3D ToF; lifting chassisNot established in reviewed sourcesMapped vacuuming and rotating-pad mopping
eufy 11S MAX2.85 in, about 72.4 mmInfrared sensors; bounce navigation2.87 in / 73 mmThe tightest gaps on this shortlist; remote operation
Saros 1079.8 mm lowered; 93.5 mm sensor elevatedRetractable LDS; lifting chassisNot established separately from dimensionsRetractable navigation and a vibrating mop
Qrevo Slim8.2 cmSolid-state 3D ToFNot established in reviewed sourcesAnother low robot with mop washing and drying

Sources: eufy specifications and FAQ, 11S MAX manual, Saros 10R, Saros 10, and Qrevo Slim support specifications. Conversions use 25.4 mm per inch and 10 mm per centimeter, following NIST's length relationships; retain the maker's original units when checking a borderline fit.

Availability matters. In the captured US pages, eufy shows a notification option for 11S MAX and Roborock marks Saros 10R out of stock. Roborock's US store also lists Saros 10 and Qrevo Slim as out of stock (“Out of stock, coming soon!”), with no restock date stated. These are conditional buying shortlists; check the exact new US bundle and current store status before purchasing.

Best mapped vacuum and mop: Roborock Saros 10R

Roborock Saros 10R Robot Vacuum and Mop with Multifunctional Dock 4.0 (RR-Saros10R5-M1) · Front. Photo: Roborock

Start with the Saros 10R if you want mapping and mopping beneath low furniture. Its 350 × 353 × 79.8 mm dimensions and solid-state navigation avoid the lowered-versus-raised LDS decision of Saros 10. That makes its published profile simpler to interpret; it does not establish superior navigation performance.

It uses rotating mops and the tank-based Multifunctional Dock 4.0. The important limitation is up to 10 mm of chassis lifting, according to Roborock. Its overview also quotes 22 mm mop lift with the chassis raised, whereas the store page lists 17 mm mop lift. Those are different published conditions, not interchangeable roof-clearance measurements. Ask about the maximum overall height in the mode you intend to use under the furniture.

Check the exact US Saros 10R bundle.

Shortest body here: eufy RoboVac 11S MAX

eufy RoboVac 11S MAX (T2126) · Front. Photo: eufy

Choose the 11S MAX when height and simple controls matter more than room mapping. The manual identifies infrared and drop sensors; eufy describes bounce navigation and button or remote operation without Wi-Fi setup. The package includes a charging base, and its dust collector needs manual emptying.

Use the 73 mm minimum, rather than the rounded body conversion, as your first exclusion rule. The manual explicitly says to block spaces below that height. A measurement right at the minimum still warrants a cautious route check.

Match 11S MAX, not just “11S”: eufy has retired the original 11S while retaining the MAX model in its range. A renewed original is a different purchase. The compact-looking base also needs substantial placement space, detailed below.

Check the 11S MAX package and availability.

Retractable-sensor alternative: Roborock Saros 10

Roborock Saros 10 (RR-Saros105-M1) · Front. Photo: Roborock

The Saros 10 pairs RetractSense navigation with a VibraRise vibrating mop. Its robot measures 79.8 mm with LDS retracted and 93.5 mm with LDS elevated. Roborock describes an upward range finder that determines when to lower the sensor and a top contact sensor for inclined spaces.

Both Saros models share the lowest published height; the “R” does not mean a taller version. Choose between their navigation and mop mechanisms after checking your gap. Saros 10 can also raise its chassis up to 10 mm on high-pile carpets; the maker says carpet elevation must be enabled in the app. Do not carry its hard-floor, lowered-sensor dimension over to every raised state.

This guide covers the US tank dock, not the separate refill-and-drain configuration. Their dock dimensions and installation requirements differ.

Check Saros 10 configurations.

Alternative with mop washing: Roborock Qrevo Slim

Roborock Qrevo Slim (RR-QrevoSlim5-M1) · Front. Photo: Roborock

Qrevo Slim has an 8.2 cm published height and solid-state 3D ToF navigation with an RGB camera. Its US manual identifies the QC0CRL robot and EWFD17LRR dock, including rotating mop modules. Roborock documents dust emptying, hot-water mop washing, onboard water refilling and warm-air drying.

Consider it when your gap leaves room beyond its body height and you want those dock functions. We could not establish a separate minimum US under-furniture operating gap from the reviewed support specifications and manual. An opening equal to its quoted height therefore stays unconfirmed. Do not substitute another Qrevo model's height or dock instructions.

Check the US Qrevo Slim configuration.

Measure the route, then assess fit

Use this measurement worksheet before narrowing the shortlist. Our conservative rule is to reject an undersized route and keep missing operating-clearance information visible.

  1. Find the lowest usable gap

    Measure from the actual cleaning surface to the lowest rail, sagging fabric or underside obstruction, including the route in and out. Keep the smallest reading.

  2. Check the approach and floor

    Measure between legs and around crossbars. Include rugs, sloping floors and thresholds along the route; measure above the rug surface when that is where the robot will travel.

  3. Match the operating state

    Compare the gap with the overall sensor and chassis state for that task. If the required operating gap is unknown, keep the result unverified.

Body-only spare space = your smallest measured gap − the published height in the relevant state. This subtraction is a screening calculation, not permission to operate. If the maker specifies a minimum passage, apply that too. Do not add an invented universal clearance margin, and do not subtract a rug's thickness twice after measuring from its surface.

The heights on one scale

The scale compares published profiles, not tested passage heights. Saros chassis lifting is a separate state; its final operating roof height is not established here.

To scaleBody and sensor heights on a shared scalePublished profiles only. Furniture clearance and chassis-lift requirements must be checked separately.

Tap a label to explore. You can also hover or use your keyboard.

Shared scale: 0–93.5 mm

Rounded conversion of the advertised body height. The manual's minimum passage is a separate requirement.

Sources: 1: eufy quotes a 2.85-inch body., 2: NIST defines the inch as exactly 25.4 mm.
72.4 mm

The published robot dimension. The lifting chassis requires a separate operating-state check.

Sources: 3: Saros 10R dimensions include a 79.8 mm height.
79.8 mm

The lowered-sensor dimension, not a universal minimum operating gap.

Sources: 4: Saros 10 is 79.8 mm with LDS retracted and 93.5 mm with LDS elevated.
79.8 mm

Converted from the maker's height in centimeters. A separate minimum passage was not established.

Sources: 5: Qrevo Slim's stated height is 8.2 cm., 6: NIST gives ten millimeters per centimeter.
82 mm

The elevated-sensor dimension. Do not treat this as a maximum during chassis lifting.

Sources: 4: Saros 10 is 79.8 mm with LDS retracted and 93.5 mm with LDS elevated.
93.5 mm

The eufy value is rounded from inches; Qrevo Slim is converted from centimeters. No extra operating margin is implied.

Source notes6 references
  1. eufy quotes a 2.85-inch body.

    www.eufy.com — source for eufy quotes a 2.85-inch body.
    Product Height: 2.85 in
  2. NIST defines the inch as exactly 25.4 mm.

    www.nist.gov — source for NIST defines the inch as exactly 25.4 mm.
    exactly equivalent to 25.4 mm
  3. Saros 10R dimensions include a 79.8 mm height.

    us.roborock.com — source for Saros 10R dimensions include a 79.8 mm height.
    350*353*79.8 mm
  4. Saros 10 is 79.8 mm with LDS retracted and 93.5 mm with LDS elevated.

    us.roborock.com — source for Saros 10 is 79.8 mm with LDS retracted and 93.5 mm with LDS elevated.
    Robot (LDS Retracted) 13.78 x 13.90 x 3.14 inches (350 x 353 x 79.8 mm) Robot (LDS Elevated) 13.78 x 13.90 x 3.68 inches (350 x 353 x 93.5 mm)
  5. Qrevo Slim's stated height is 8.2 cm.

    support.roborock.com — source for Qrevo Slim's stated height is 8.2 cm.
    The height of the robot is 8.2 cm
  6. NIST gives ten millimeters per centimeter.

    www.nist.gov — source for NIST gives ten millimeters per centimeter.
    10 millimeters (mm) = 1 centimeter (cm)

Representative gaps: below 73 mm, none of these candidates qualifies under our screening rule. At 79.8 mm, the Saros bodies merely equal the gap: neither gets a confirmed result. At 8.2 cm, Qrevo Slim likewise has no body-only spare space; the Saros models remain conditional on operating clearance. Even 93.5 mm only matches Saros 10's elevated-sensor dimension, without resolving chassis lift.

  • No: Exclude: the route is below the relevant body height or the maker's minimum passage.
  • Partly: Unverified: the body fits on paper, but operating headroom, sensor state or the return route is unresolved.
  • Yes: Candidate for a supervised first run: the documented requirements and measured route agree, with measurement uncertainty considered.

If the result is no match, keep that area excluded and clean it manually. Prefer that outcome to buying solely on a rounded height. For a rug or threshold on the approach, also use the high-threshold guide.

Dock space and replacement parts

The US manuals identify these dock placement envelopes; height × width × depth describes reserved space, not closed dock dimensions.

11S MAX charging base

Manual's placement requirement
Clear 3 ft / 1 m on each side and 6 ft / 2 m in front

Saros 10R, EWFD28LRR tank dock

Manual's placement requirement
At least 0.75 m × 0.4 m × 1.2 m

Saros 10, EWFD32LRR tank dock

Manual's placement requirement
At least 0.8 m × 0.42 m × 1 m

Qrevo Slim, EWFD17LRR tank dock

Manual's placement requirement
At least 0.9 m × 0.4 m × 1.2 m
Full comparison table

Swipe to compare. Row labels stay visible.

Exact configurationManual's placement requirement
11S MAX charging baseClear 3 ft / 1 m on each side and 6 ft / 2 m in front
Saros 10R, EWFD28LRR tank dockAt least 0.75 m × 0.4 m × 1.2 m
Saros 10, EWFD32LRR tank dockAt least 0.8 m × 0.42 m × 1 m
Qrevo Slim, EWFD17LRR tank dockAt least 0.9 m × 0.4 m × 1.2 m
Exact configurationManual's placement requirement
11S MAX charging baseClear 3 ft / 1 m on each side and 6 ft / 2 m in front
Saros 10R, EWFD28LRR tank dockAt least 0.75 m × 0.4 m × 1.2 m
Saros 10, EWFD32LRR tank dockAt least 0.8 m × 0.42 m × 1 m
Qrevo Slim, EWFD17LRR tank dockAt least 0.9 m × 0.4 m × 1.2 m

Sources: 11S MAX manual, Saros 10R US manual, Saros 10 US manual, Qrevo Slim US manual. Check tank removal, lids and the accessible return route before choosing an alcove. Refill-and-drain models require their own installation assessment. The small-apartment guide covers the wider space decision.

For consumables, match the exact suffix and part. eufy's T29151N2 non-washable filter set explicitly includes 11S MAX and excludes non-MAX 11S. Roborock's RR-LW2-Saros10R-M02 washable filters explicitly name Saros 10R; that listing does not establish Saros 10 compatibility. Use the eufy part page or Roborock filter page to verify the match. Do not assume a robot filter, dock bag or mop pad fits the whole brand.

How we choose

We compare official US product specifications, model-specific manuals and maker support answers. Picks reflect documented dimensions, navigation states, mop mechanisms and servicing requirements. We have not physically evaluated these robots; minimum operating gaps and current stock stay unconfirmed where the evidence does not settle them. Published sensor and suction claims cannot establish cleaning or obstacle-avoidance results. See our disclosure.

Verdict

Start with Saros 10R for a low mapped vacuum and mop, or 11S MAX when its shorter body is decisive. Choose Saros 10 for its retractable-sensor and vibrating-mop configuration; consider Qrevo Slim when its taller body and dock suit the space. Buy only after the gap, operating state, exact US bundle and dock placement all check out.

Frequently asked questions

What is the lowest profile robot vacuum here?

The eufy RoboVac 11S MAX has the shortest published body in this comparison: 2.85 inches, approximately 72.4 mm after conversion. Its manual nevertheless says to keep it away from spaces below 73 mm. The Saros 10R and lowered Saros 10 are both 79.8 mm; Qrevo Slim is 8.2 cm. These dimensions establish a shortlist, while actual fit still needs the route and operating conditions checked.

Will a robot fit if the furniture gap equals its height?

Treat an exact match as unconfirmed. A body dimension leaves no allowance for your measurement uncertainty, obstructions or changes in floor level. The 11S MAX illustrates the distinction: its advertised body is 2.85 inches, while its minimum stated passage is 2.87 inches. For the Roborocks, a separate minimum under-furniture operating gap was not established in the sources reviewed. Ask the maker about your exact gap and cleaning mode.

Roborock Saros 10 vs 10R: which is better under furniture?

Our starting choice is the 10R when you want a low mapped vacuum and mop: its solid-state navigation does not depend on lowering a rotating LDS tower. Both models quote 79.8 mm in their lowest published profile. Saros 10 instead retracts its LDS and uses a vibrating mop; 10R uses rotating mops. Both have lifting chassis, so neither gets an unconditional fit promise from its lowest height alone.

Is the lowest robot also best for a small apartment?

Choose around the dock as well as the furniture. The 11S MAX uses a charging base and remote control, while these Roborocks add mop washing and dust emptying. The manuals specify placement space beyond the dock itself. Measure the approach and servicing area before ordering; a robot that reaches under the sofa is a poor purchase if you have nowhere suitable to put its station.

What should I do if a robot gets stuck under the sofa?

Pause it and check the lowest obstruction, loose cords, rug edges and the return route before another run. The 11S MAX manual recommends physically blocking problem areas below its minimum clearance. Roborock's manuals recommend following the first cleaning route to spot problems. Keep an unreliable route excluded until you resolve the cause, and make sure you can retrieve the robot without moving heavy furniture.

Related guides