Skip to content

Explainer

Dreame L10s Ultra Generations

Which Robot and Dock Should You Buy?

Identify the exact Dreame L10s Ultra generation, compare its robot and dock, and match bags, filters and mops. Know when to choose a complete alternative.

By thisSWEEP EditorialUpdated November 10, 20268 min read2 picks

Our recommendation: Dreame L40 Ultra Gen 2

the currently offered complete alternative

Limit: Mops cannot be removed for carpet-only cleaning

On this page · Quick picks: decide which purchase you are making

For a new purchase, our currently offered alternative is the Dreame L40 Ultra Gen 2 standard US robot-and-station package; if you specifically want a Dreame L10s Ultra robot vacuum and mop, prefer L10s Ultra Gen 2 once a complete US offer is confirmed. Gen 2 adds an extending mop and a published 10.5mm mop lift, while both L10s US product pages showed sold out when checked on November 3, 2026. The original remains worth identifying correctly for ownership, replacement supplies and any used purchase.

Photos: Dreame

Quick picks: decide which purchase you are making

  • Buying a complete new system now: start with Dreame L40 Ultra Gen 2 at Dreame. Choose the standard package unless you specifically want the named accessory or detergent-dispenser bundle.
  • Waiting for an L10s: choose Dreame L10s Ultra Gen 2 for its MopExtend mechanism. Confirm stock, US labels and included base before paying.
  • Maintaining the original: use the original column below and the supply matrix. Do not order Gen 2 bags or filters merely because the family name looks familiar.

Original versus Gen 2: the comparison that matters

These are the maker's published specifications, not measured cleaning results. Station dimensions retain Dreame's printed order; obtain a placement drawing before interpreting them as width and depth.

Storefront SKU identifying this package

L10s Ultra original, US product
010204AA000303
L10s Ultra Gen 2, US product
010204AA000965

Robot dimensions

L10s Ultra original, US product
350 × 350 × 97mm
L10s Ultra Gen 2, US product
350 × 350 × 97.2mm

Station dimensions

L10s Ultra original, US product
423 × 340 × 568mm
L10s Ultra Gen 2, US product
457 × 340 × 590.5mm

Mop mechanism

L10s Ultra original, US product
Dual rotary mops; no MopExtend in Dreame's comparison
L10s Ultra Gen 2, US product
Dual rotary mops with MopExtend RoboSwing

Published mop lift

L10s Ultra original, US product
Up to 7mm
L10s Ultra Gen 2, US product
10.5mm

Maximum advertised suction

L10s Ultra original, US product
5,300Pa
L10s Ultra Gen 2, US product
10,000Pa

Published threshold crossing

L10s Ultra original, US product
2cm
L10s Ultra Gen 2, US product
20mm; a manufacturer lab claim

Station functions

L10s Ultra original, US product
Dust emptying, mop washing, hot-air drying, water refill, solution adding
L10s Ultra Gen 2, US product
Dust emptying, mop washing, warm-air drying, water refill, solution adding

Direct US storefront status at our check

L10s Ultra original, US product
Sold out
L10s Ultra Gen 2, US product
Sold out
Full comparison table

Swipe to compare. Row labels stay visible.

DetailL10s Ultra original, US productL10s Ultra Gen 2, US product
Storefront SKU identifying this package010204AA000303010204AA000965
Robot dimensions350 × 350 × 97mm350 × 350 × 97.2mm
Station dimensions423 × 340 × 568mm457 × 340 × 590.5mm
Mop mechanismDual rotary mops; no MopExtend in Dreame's comparisonDual rotary mops with MopExtend RoboSwing
Published mop liftUp to 7mm10.5mm
Maximum advertised suction5,300Pa10,000Pa
Published threshold crossing2cm20mm; a manufacturer lab claim
Station functionsDust emptying, mop washing, hot-air drying, water refill, solution addingDust emptying, mop washing, warm-air drying, water refill, solution adding
Direct US storefront status at our checkSold outSold out
DetailL10s Ultra original, US productL10s Ultra Gen 2, US product
Storefront SKU identifying this package010204AA000303010204AA000965
Robot dimensions350 × 350 × 97mm350 × 350 × 97.2mm
Station dimensions423 × 340 × 568mm457 × 340 × 590.5mm
Mop mechanismDual rotary mops; no MopExtend in Dreame's comparisonDual rotary mops with MopExtend RoboSwing
Published mop liftUp to 7mm10.5mm
Maximum advertised suction5,300Pa10,000Pa
Published threshold crossing2cm20mm; a manufacturer lab claim
Station functionsDust emptying, mop washing, hot-air drying, water refill, solution addingDust emptying, mop washing, warm-air drying, water refill, solution adding
Direct US storefront status at our checkSold outSold out

Sources: original US product, Gen 2 US product, and the L10s Ultra column of Dreame's Pro Ultra comparison. Storefront SKUs come from each product page's own metadata; they are not Amazon identifiers. Suction pressure alone does not demonstrate better debris pickup.

L10s Ultra Gen 2: our preferred L10s if a complete offer returns

Gen 2 makes the most sense when you want the extending mop and adjustable carpet strategy. Dreame lists carpet avoidance, mop raising and prioritized carpet cleaning; the robot still needs a floor plan that suits your rugs and furniture.

The US-A02 manual identifies robots RLL32SE/RLL32SE-1 and bases RCLE0304/RCLE0304-3, with 120V, 60Hz station input. Those are identifiers to check against the supplied labels, not permission to interchange every suffix. Its navigation inventory names an LDS and a separate 3D line-laser sensor; this does not establish local-only maps or camera absence.

The standard package list includes the robot, station, ramp, detergent compartment, solution, mop holders and pads, and dust bags. The manual documents Dreamehome setup using 2.4GHz Wi-Fi. Saved-floor limits, subscription terms and dependable offline map operation are not established by that setup instruction.

Check the Gen 2 package and availability at Dreame.

Original L10s Ultra: identify it before buying old stock or supplies

The original already provides automatic dust emptying and mop washing, drying, water refill and solution adding. Its US page explicitly describes an RGB camera and 3D structured light, plus remote video control in Dreamehome. It is unsuitable as a confirmed camera-free choice.

Use the original US storefront SKU and included-base description as your starting identifier. We have not established the original's US robot/base hardware codes and electrical label from a readable US manual; ask for both labels before a used or imported purchase. Do not substitute Gen 2's documented codes.

Dreame's own original specifications conflict. The original US page gives clean/used-water tanks of 2.5L/2.4L, but the original column in its Pro Ultra comparison gives 3L/2.5L. The original page also lists 210 minutes for quiet vacuuming and 160 minutes for quiet vacuuming/mopping, while its FAQ says 150 minutes without the same mode detail. Check the supplied tank markings and exact operating mode; we do not collapse those figures into one capacity or runtime promise.

Check the original package information at Dreame.

L40 Ultra Gen 2: the currently offered complete alternative

Choose this separately documented US package when you want a tank dock and extending mop without waiting for L10s stock. Its official page marks standard white and black variants available and lists the robot, base, ramp, brushes, filter, mop assemblies and bags.

The US manual identifies RLL53SE with RCLE0512, with 120V, 60Hz base input. Its product page lists extending side brush and mop, 10.5mm mop lift, hot-water mop washing and hot-air drying; the standard package's automatic detergent module is purchased separately. Choose the dispenser bundle explicitly if automatic dosing matters.

This is not a lower-profile escape route: its published robot height is 97mm, and its listed station dimensions are 457 × 340 × 590mm. Confirm the same furniture and station access checks. Check the exact L40 Ultra Gen 2 package at Dreame.

Buying guide: verify the generation and your home

Match the full name and package

Gen 3 Kit is a real product on Dreame Ireland, but this research does not establish a complete US version. L10s Pro Ultra Heat is also a separately named product on Dreame's US comparison page. Keep those identities separate from the original and Gen 2; a familiar shell or an English manual does not confirm a US electrical package.

For any used or refurbished offer, request robot and station nameplate photos, condition, the actual included-parts list, return terms and written warranty eligibility. Dreame's US policy ties coverage to authorized channels and first sale/use in the US, and says service may be limited to the country of first sale. Do not carry a new-product warranty promise across to a different seller or condition.

Verify the complete package
  1. Read the full model name

    Match the generation and US storefront package before comparing features.

  2. Match robot and station labels

    Confirm the supplied pair with Dreame when a hardware code or suffix is unclear.

  3. Audit the included parts

    Check tanks, bags, mop holders, pads, ramp and any promised brush or detergent module against the actual offer.

Floors, rugs, thresholds and furniture

Ask your flooring maker whether damp robotic mopping and the chosen cleaner are approved for the exact finish. Treat mop lift as mechanism travel, not a guarantee that a rug stays dry. For uncertain pile, our buying rule is to use an avoidance strategy and supervise the first route before leaving it scheduled. Our hardwood guide covers the broader floor shortlist; our mop-lifting guide addresses that purchase priority.

Measure the lowest furniture obstruction and every transition's height and shape. Gen 2 is not a furniture-clearance upgrade over the original on the published heights. If the seller cannot establish clearance, rug handling or threshold suitability for your home, neither L10s is a confirmed match; do not turn a maximum crossing claim into a guarantee for a sharp step.

Station space includes service access

The Gen 2 US manual requires an open location with good Wi-Fi and objects cleared 1.5m in front and 5cm from either side. Leave additional overhead access to lift out tanks and front access for the dust-bag cover; the published closed dimensions cannot confirm an enclosed-cabinet fit. Dreame recommends tile or marble under this station to reduce water-stain risk to wood or carpet.

Gen 2's refill-and-drain hookup kit is separately purchased and region-dependent. Plan to carry clean and used water unless Dreame confirms a supported installation for your exact package and address.

  • Yes: Floor finish and cleaner approved by your flooring maker
  • Yes: Station approach, tank removal and bag-cover access measured
  • Partly: Rug handling and threshold geometry confirmed for your rooms
  • No: Purchase on hold when a required fit or regional package remains unconfirmed

Replacement supplies: match each part independently

The numbers below are Dreame's storefront SKUs. Original and Gen 2 bags and filters have separate listings; the shared roller and pads are supported independently by explicit model listings or product metadata.

Shared Regular Mop Pads

Original L10s Ultra
Two pairs; 20010100000872
L10s Ultra Gen 2
Same pads; both generations tagged in the official product data
Full comparison table

Swipe to compare. Row labels stay visible.

SupplyOriginal L10s UltraL10s Ultra Gen 2
Dust bags3L, three bags; 200101000008743.2L, three bags; 20010100000840
Dust-box filtersTwo filters; 20010100000898Two filters; 20010100001065
Shared rubber rollerOne brush; 20010100000878Same explicitly listed brush
Shared Regular Mop PadsTwo pairs; 20010100000872Same pads; both generations tagged in the official product data
Approved solution packaging10.6oz bottles, three-pack; 20010100000335Standard 1L bottle; 20010100000907
SupplyOriginal L10s UltraL10s Ultra Gen 2
Dust bags3L, three bags; 200101000008743.2L, three bags; 20010100000840
Dust-box filtersTwo filters; 20010100000898Two filters; 20010100001065
Shared rubber rollerOne brush; 20010100000878Same explicitly listed brush
Shared Regular Mop PadsTwo pairs; 20010100000872Same pads; both generations tagged in the official product data
Approved solution packaging10.6oz bottles, three-pack; 20010100000335Standard 1L bottle; 20010100000907

The filter-name trap: the original-compatible filter title includes L10s Pro Gen2. That is not L10s Ultra Gen 2; use the separate Ultra Gen 2 filter listing above. Do not infer compatibility from the word “Gen2” alone.

Several individual bags and filters showed sold out at our check. Dreame also offered a Gen 2-compatible accessory kit, SKU 20010100000905, listing a main brush, side brushes, bags, filters and mop pads. Its “Wash-free Mop Pad ×3” wording does not specify pairs; confirm the pad quantity before treating it as a like-for-like bundle.

Follow the supplied manual's solution-installation method; a compatible detergent formula does not establish that every bottle format fits every dispenser. Gen 2 specifically takes approved solution in its refillable detergent compartment. Avoid improvising a refill or adding other cleaners.

For ongoing care, Gen 2's manual says to clean the used-water tank after each use, manually clean the washboard and rinse the dust box/filter with clean water, reinstalling them only when completely dry. Automatic mop care still leaves those jobs to you. Check supply availability alongside the robot rather than after the first replacement is due.

How we choose

We compare official US product pages, model-specific manuals, package lists and replacement-part metadata. Picks prioritize a complete documented offer, floor and station fit, then maintenance supplies. We have not physically evaluated these robots; advertised pressure and clearance figures remain manufacturer claims. Regional uncertainty and conflicts stay visible, and commissions do not decide the shortlist (disclosure).

Verdict

Choose L10s Ultra Gen 2 if you want an L10s and can confirm a complete US package; choose L40 Ultra Gen 2 standard as the currently offered alternative, adding the dispenser only when required. Keep the original L10s Ultra separate when checking labels and supplies. If package identity, home fit or replacement support remains unresolved, hold the purchase.

The short answer

#1
Dreame L40 Ultra Gen 2 robot vacuum and mop in a white docking station, front studio view

Dreame

L40 Ultra Gen 2

Robot height (maker)
97 mm
Robot width
350 mm
Threshold limit (maker claim)
20 mm
Choose
The currently offered complete alternative
Check
Mops cannot be removed for carpet-only cleaning
#2

Dreame L10s Ultra Gen 2 for its MopExtend mechanism

Choose
Our preferred L10s if a complete offer returns

Frequently asked questions

Is the Dreame L10s Ultra Gen 2 the same as the original?

No. Dreame documents separate products: the original has dual rotary mops without MopExtend in its US comparison, while Gen 2 adds MopExtend RoboSwing. The published mop lifts are up to 7mm and 10.5mm respectively. Their bags and filters also have different official compatibility lists, so include the full generation name when buying supplies.

Does the L10s Ultra Gen 2 wash its mops with hot water?

The saved US Gen 2 page specifies automatic mop washing and warm-air drying, but does not establish a hot-water washing specification. Drying temperature does not establish washing temperature. If hot-water washing is essential, Dreame's separately documented L40 Ultra Gen 2 page explicitly lists it; check that exact package rather than borrowing a feature from an L10s Pro Ultra Heat listing.

Can I use an original L10s Ultra dock with Gen 2?

Treat that combination as unconfirmed. The Gen 2 US manual specifies RCLE0304/RCLE0304-3 supply units, and its documented robot family is RLL32SE/RLL32SE-1. Buy a complete matched package, or obtain written confirmation from Dreame for the labels on both pieces. A shared replacement brush or similar-looking station does not establish dock compatibility.

Does the L10s Ultra Gen 2 require plumbing?

No plumbing is needed for the documented tank workflow: its manual instructs you to remove and fill the clean-water tank and clean the used-water tank after a job. Dreame describes the automatic refill-and-drain hookup kit as a separate purchase available only in specific regions. A reserved connection on the station does not mean that kit is included or supported at your address.

Which replacement parts are shared between the original and Gen 2?

Dreame's US Rubber Brush listing explicitly names both generations, and its Regular Mop Pads product metadata tags both. Those are documented shared choices. The original and Gen 2 bags and filters have separate storefront SKUs and compatible-model lists. Match each supply independently; an accessory labelled for L10s Pro Gen2 does not automatically fit L10s Ultra Gen 2.

Should US buyers choose the L10s Ultra Gen 3 Kit instead?

Dreame Ireland documents an L10s Ultra Gen 3 Kit, so the name is real. This guide has not established a corresponding complete US offer, electrical specification or US support entitlement. Treat it as a separate regional package until those details are confirmed. Dreame's US warranty policy says service may be limited to the country of first sale.

Related guides