Skip to content

Explainer

eufy Omni S1 vs S1 Pro

Versions, Dock Packages and What to Buy

Choose between eufy Omni S1, S1 Pro and the current E25 alternative. Compare exact docks, rug limits, furniture clearance, box contents and replacement parts.

By thisSWEEP EditorialUpdated November 6, 20269 min read3 picks

Our recommendation: eufy Omni E25 (T2353)

Buying a current roller-mop package

Limit: The maker recommends no-go zones for carpets thicker than about 26 mm and for very light or thin rugs, so thick carpet is a weak fit

On this page · Quick picks

For a new roller-mop purchase, start with the eufy Omni E25: eufy now says Omni S1 and S1 Pro are discontinued in its US store. If you are considering remaining S1 stock, the S1 Pro adds different obstacle sensing, electrolyzed-water hardware and a station display; it is a separate model. Existing owners should check compatible supplies before replacing a functioning machine. eufy's US status notice explains continued owner support.

Photos: eufy

Quick picks

Compare specifications and all conditions

Buying a current roller-mop package

Our pick
eufy Omni E25 (T2353) with All-in-One Station
Purchase condition
Check furniture and rug suitability below

Specifically want the Pro's extra hardware

Our pick
eufy Omni S1 Pro (T2080)
Purchase condition
Verify remaining stock, exact station and warranty eligibility

Considering the simpler S1

Our pick
eufy Omni S1 (T2071)
Purchase condition
Choose knowingly without Pro sensing, ozone hardware or display

Already own either S1 model

Our pick
Keep it maintained; T29C00A1 for a worn roller
Purchase condition
Match each other replacement part separately
Full comparison table

Swipe to compare. Row labels stay visible.

Your situationOur pickPurchase condition
Buying a current roller-mop packageeufy Omni E25 (T2353) with All-in-One StationCheck furniture and rug suitability below
Specifically want the Pro's extra hardwareeufy Omni S1 Pro (T2080)Verify remaining stock, exact station and warranty eligibility
Considering the simpler S1eufy Omni S1 (T2071)Choose knowingly without Pro sensing, ozone hardware or display
Already own either S1 modelKeep it maintained; T29C00A1 for a worn rollerMatch each other replacement part separately
Your situationOur pickPurchase condition
Buying a current roller-mop packageeufy Omni E25 (T2353) with All-in-One StationCheck furniture and rug suitability below
Specifically want the Pro's extra hardwareeufy Omni S1 Pro (T2080)Verify remaining stock, exact station and warranty eligibility
Considering the simpler S1eufy Omni S1 (T2071)Choose knowingly without Pro sensing, ozone hardware or display
Already own either S1 modelKeep it maintained; T29C00A1 for a worn rollerMatch each other replacement part separately

These are specification-based choices. Buying links go to the manufacturer because an exact US Amazon offer has not been verified.

Identify the robot before comparing bundles

eufy's US support list identifies S1 as T2071 and S1 Pro as T2080. Obtain the robot's product number and the station's rating-label details before accepting a package described simply as “S1.” For S1 Pro, eufy locates the serial number beneath the dustbin; photograph that alongside the station label when checking an existing unit. US model list, label locations.

US maker-store status

Omni S1
Unavailable since June 2026
Omni S1 Pro
Unavailable since April 2026
Omni E25 alternative
Product page offers Add to Cart

Obstacle avoidance

Omni S1
AI.See
Omni S1 Pro
3D MatrixEye
Omni E25 alternative
AI.See; RGB camera and LED

Electrolyzed-water hardware

Omni S1
Absent
Omni S1 Pro
Present
Omni E25 alternative
Not established by the E25 sources used here

Station display

Omni S1
No Pro-style display
Omni S1 Pro
Display included
Omni E25 alternative
Do not infer Pro controls

Robot height

Omni S1
9.60 cm
Omni S1 Pro
9.60 cm
Omni E25 alternative
111 mm

Published mop lift

Omni S1
12 mm
Omni S1 Pro
12 mm
Omni E25 alternative
10.8 mm

Advertised suction

Omni S1
8,000 Pa
Omni S1 Pro
8,000 Pa
Omni E25 alternative
20,000 Pa Turbo

Floor-washing mechanism

Omni S1
Mop cleaned during a run
Omni S1 Pro
Mop cleaned during a run
Omni E25 alternative
HydroJet self-cleaning roller
Full comparison table

Swipe to compare. Row labels stay visible.

Buying differenceOmni S1Omni S1 ProOmni E25 alternative
US maker-store statusUnavailable since June 2026Unavailable since April 2026Product page offers Add to Cart
Obstacle avoidanceAI.See3D MatrixEyeAI.See; RGB camera and LED
Electrolyzed-water hardwareAbsentPresentNot established by the E25 sources used here
Station displayNo Pro-style displayDisplay includedDo not infer Pro controls
Robot height9.60 cm9.60 cm111 mm
Published mop lift12 mm12 mm10.8 mm
Advertised suction8,000 Pa8,000 Pa20,000 Pa Turbo
Floor-washing mechanismMop cleaned during a runMop cleaned during a runHydroJet self-cleaning roller
Buying differenceOmni S1Omni S1 ProOmni E25 alternative
US maker-store statusUnavailable since June 2026Unavailable since April 2026Product page offers Add to Cart
Obstacle avoidanceAI.See3D MatrixEyeAI.See; RGB camera and LED
Electrolyzed-water hardwareAbsentPresentNot established by the E25 sources used here
Station displayNo Pro-style displayDisplay includedDo not infer Pro controls
Robot height9.60 cm9.60 cm111 mm
Published mop lift12 mm12 mm10.8 mm
Advertised suction8,000 Pa8,000 Pa20,000 Pa Turbo
Floor-washing mechanismMop cleaned during a runMop cleaned during a runHydroJet self-cleaning roller

Sources: eufy's version comparison, S1 carpet FAQ, furniture FAQ, and the Omni E25 column in its current US comparison. Suction figures are maker claims, not comparable pickup measurements; mop lift alone does not establish dry rugs.

Current alternative: Omni E25 with All-in-One Station

eufy

Robot Vacuum Omni E25

T2353

Robot height (maker)
112 mm
Mop system
roller
Navigation
LiDAR
Choose
Buying a current roller-mop package
Check
The maker recommends no-go zones for carpets thicker than about 26 mm and for very light or thin rugs, so thick carpet is a weak fit

Check package and model options

The E25 is our starting purchase here for someone who wants a roller system without hunting discontinued S1 stock. Its US page specifies HydroJet, DuoSpiral detangling brushes and the extending CornerRover side-brush arm, plus station emptying, roller washing, drying, water refill and detergent dispensing. It offers the standard E25, an accessories package and a white version as separate selections. Check the selected package rather than treating everything displayed nearby as included. One suffix detail: the US page address is T2353111, but its selectable black product SKU is T2353112, so match the selected item at checkout rather than assuming the address identifies its sale SKU. That suffix difference alone does not indicate a hardware change.

The compromise is fit: E25's published 111 mm height exceeds the S1 family's 9.60 cm. Its carpet instructions call for vacuum-only cleaning on short pile, avoidance on medium and long pile, and no-go zones for dark carpets. This makes it a conditional choice for mixed flooring. For a cross-brand shortlist, use our roller-mop buying guide.

Check the current US E25 package at eufy.

Legacy Pro option: S1 Pro and its complete station package

Choose remaining Pro stock only if its additional hardware matters enough to justify verifying a discontinued package. The Pro's 3D MatrixEye, electrolyzed-water function and station screen are the documented upgrades over S1. They do not establish that every obstacle will be avoided.

The US S1 Pro package list names the robot, UniClean station, power cord, cleaning tool, cleaner, two sets of side brushes, an additional rolling mop, additional dust bag and additional high-performance filter. Use the separate Pro manual alongside that checklist, particularly if the offer's condition differs from a new standard package.

There is also a separately sold S1 Pro Station (Low Voltage). Its page describes an upgraded station with a hexagonal bottom filter and says newly purchased stations require pairing. That is a replacement-station purchase, not evidence of a complete robot bundle or of the station revision supplied with remaining stock. Replacement station details.

eufy also sells the T29M0011 automatic water refill and drainage module, whose page names S1 Pro compatibility. It is a separate accessory purchase, not part of the standard tank package; before planning a connection, confirm the exact module, station revision and installation requirements with eufy. Water module details.

Legacy non-Pro option: S1 with its own station

S1 retains the series' real-time mop cleaning, using AI.See rather than Pro's obstacle system. Its accessories guide lists one bottle of solution, one power cord, two side brushes and one cleaning tool. Do not transfer the Pro's additional roller, bag and filter quantities to an S1 offer.

Use the T2071 manual and require the matching station. eufy's separate Omni S1 Station (Low Voltage) names S1 compatibility, while its support FAQ says S1 does not support automatic water inlet and drainage. An S1 station listing therefore should not be treated as a Pro upgrade or a plumbed package.

Existing-owner pick: the explicitly compatible replacement roller

The T29C00A1 roller mop explicitly fits S1, S1 Pro, E25, E28 and S2. This is a documented overlap, not permission to interchange every component. It is also the wet roller mop, a different item from the debris-collecting rolling brush and its guard. Replacement timing conflicts across eufy's own pages: the roller page suggests replacing it every two months depending on your usage, while the Pro maintenance chart says mopping pads need replacement every six months or at significant wear. Ask eufy which schedule applies to your roller rather than relying on either figure.

Wet roller mop

Official identifier or route
T29C00A1
What the documentation establishes
Explicit S1/S1 Pro/E25/E28/S2 fit

Side brushes

Official identifier or route
T29B8001
What the documentation establishes
Explicit S1 and S1 Pro fit

High-performance dust filter

Official identifier or route
T29B7001, in eufy's US accessory index
What the documentation establishes
Explicit S1 and S1 Pro fit; confirm supply if the individual route redirects

Station dust bag

Official identifier or route
T291R110
What the documentation establishes
Names S2, S1 and S1 Pro; do not infer pack quantity

S1-family hard-floor cleaner

Official identifier or route
T29C1001
What the documentation establishes
Explicit S1 and S1 Pro fit

E25/E28 accessories package

Official identifier or route
T290QAR0
What the documentation establishes
Names E25/E28; does not establish whole-kit S1 compatibility
Full comparison table

Swipe to compare. Row labels stay visible.

Item to matchOfficial identifier or routeWhat the documentation establishes
Wet roller mopT29C00A1Explicit S1/S1 Pro/E25/E28/S2 fit
Side brushesT29B8001Explicit S1 and S1 Pro fit
High-performance dust filterT29B7001, in eufy's US accessory indexExplicit S1 and S1 Pro fit; confirm supply if the individual route redirects
Station dust bagT291R110Names S2, S1 and S1 Pro; do not infer pack quantity
S1-family hard-floor cleanerT29C1001Explicit S1 and S1 Pro fit
E25/E28 accessories packageT290QAR0Names E25/E28; does not establish whole-kit S1 compatibility
Item to matchOfficial identifier or routeWhat the documentation establishes
Wet roller mopT29C00A1Explicit S1/S1 Pro/E25/E28/S2 fit
Side brushesT29B8001Explicit S1 and S1 Pro fit
High-performance dust filterT29B7001, in eufy's US accessory indexExplicit S1 and S1 Pro fit; confirm supply if the individual route redirects
Station dust bagT291R110Names S2, S1 and S1 Pro; do not infer pack quantity
S1-family hard-floor cleanerT29C1001Explicit S1 and S1 Pro fit
E25/E28 accessories packageT290QAR0Names E25/E28; does not establish whole-kit S1 compatibility

The E25/E28 kit contains two roller mops, three station bags and one robot filter, alongside brushes and dirty-water filters. Buy it for its named family. The older S1 “Half Year Combo” has inconsistent fit wording: its title includes S1 and S1 Pro, while the description names only S1 Pro. Confirm non-Pro fit before relying on that kit. Kit wording.

How we choose

We compare current US maker pages, separate model manuals, support instructions and exact accessory identifiers. The S1 records describe legacy packages; they are not claims of current robot availability. We retain contradictory guidance rather than converting it into a performance promise. These recommendations use published specifications and documented upkeep, without independent cleaning measurements. See our disclosure.

Check furniture, rugs and station access

Furniture: eufy gives both S1 robots a 9.60 cm body, but specifies 10.2 cm minimum furniture clearance and recommends 11 cm or more where possible. Dark, reflective or uneven undersides can still interfere with sensing. Measure the lowest cross-brace and the whole entrance, not just the sofa's front edge.

  • 9.60 cmS1 and S1 Pro robot height, per eufy
  • 10.2 cmMinimum furniture clearance in the shared support FAQ
  • 11 cmFurniture clearance eufy recommends where possible

Dock: the Pro's documented station dimensions are 383 mm wide × 467 mm deep × 670 mm high. Its docking FAQ requires 1.5 m open in front and 0.5 m on each side; the US landing page additionally recommends 15.75 inches above the station for tank removal. That is much more space than a closed cabinet outline. For S1, check its own manual's placement illustration and tank access before committing to an alcove. An E25 service envelope is not established here, so do not transfer these S1 dimensions to it. Pro dimensions, approach space.

Rugs: both S1 models publish 12 mm mop lift. However, eufy's shared carpet FAQ permits carpet below 2.5 cm, while the non-Pro flooring FAQ recommends no-go zones for long pile above 0.78 inches. These limits conflict. The Pro's US page separately says it works best on medium-to-short pile 0.5 inches or less. Our buying rule is to exclude questionable thick or high-pile rugs rather than assume the more permissive wording guarantees access or dryness.

Thresholds: eufy claims 2 cm for S1 Pro; the E25 comparison publishes 21 mm. Neither cited claim establishes the threshold shape and approach needed in your home. The S1 Pro number does not establish a non-Pro limit. Compare your actual transition in our high-threshold guide.

Water care, manual work and setup

For both S1 models, eufy describes water applied during mopping and a squeegee directing removed dirt into a separate dirty-water tank. The station also mixes the designated cleaner automatically. Self-cleaning still leaves owner maintenance: the Pro's maintenance chart calls for cleaning the station's dirty-water tank every three days or on an alert, and the filter tray once a month. Keep the radar window and wheels clear, inspect the wet roller, and clean the dirty-water filter when blocked. The Pro leak guide links clogged filters and incorrect dirty-tank seating to leakage. Follow the model's manual for emptying tanks, cleaning the tray and drying parts before refitting.

Use the S1-family approved cleaner rather than a generic detergent or E25-branded bottle chosen by appearance. eufy's Pro water-care instructions describe filling the tank and putting it back in the station; verify automatic water management as a separate, explicitly compatible US purchase. No complete plumbed kit is established by the evidence here.

For setup, plan for an app account and strong 2.4 GHz Wi-Fi at the dock; the Pro connection guide explicitly requires that band. eufy recommends migrating from Clean to the Anker eufy app, with Clean receiving only basic security and privacy maintenance. The migration table mislabels T2071 as S1 Pro; use the model-specific manual for identity. S1's mapping guide starts mapping from its station and supports no-go and no-mop zones. The Pro landing page describes obstacle recognition as offline; that does not establish offline map storage, remote control or subscription terms.

Before accepting an offer

  1. Match the identity

    Obtain the exact robot product number, station rating label and condition.

  2. Check the complete package

    Confirm robot, matching US station, cord, installed components and listed spares; check warranty eligibility.

  3. Prove home fit

    Measure furniture, rug pile, thresholds, approach space and tank-removal access.

  4. Match ongoing supplies

    Verify roller, dust filter, bags and designated solution by their own fit lists.

Verdict

Start with the Omni E25 for a current roller-mop purchase if its height and carpet guidance fit your home. For remaining S1 stock, choose Pro only for its documented extra hardware and a verified complete package; choose S1 knowingly without those extras. Existing owners can maintain either with explicitly compatible parts. If station access or rug suitability fails, neither an attractive bundle nor a larger suction number fixes the fit.

The short answer

#1
eufy Omni E25 robot vacuum docked in its Omni station, front view on a white background

eufy · T2353

Robot Vacuum Omni E25

Robot height (maker)
112 mm
Mop system
roller
Navigation
LiDAR
Choose
Buying a current roller-mop package
Check
The maker recommends no-go zones for carpets thicker than about 26 mm and for very light or thin rugs, so thick carpet is a weak fit
#2

eufy Omni S1 Pro

Choose
Specifically want the Pro's extra hardware

Frequently asked questions

Is the eufy Omni S1 the same as the S1 Pro?

They are separate models: S1 is T2071 and S1 Pro is T2080 in eufy's US support list. The Pro adds 3D MatrixEye obstacle avoidance, electrolyzed-water hardware and a station display; S1 uses AI.See. Both have a self-cleaning mopping system. Choose by the exact robot and station identity rather than a shortened S1 listing title.

Can I still buy an eufy Omni S1 or S1 Pro?

eufy says S1 Pro stopped being available on its US store in April 2026 and S1 stopped being available in June 2026, while other regions or channels may still have stock. Treat any remaining offer as a package-verification exercise: check condition, US station, robot model, included supplies and applicable warranty. Our current alternative here is the separately documented Omni E25.

Does S1 Pro need a water connection?

Assess the standard package as a tank-managed setup: eufy's Pro water-care instructions tell owners to fill the tank and return it to the station. Do not assume an automatic water-management kit comes with the robot. The non-Pro S1 does not support automatic inlet and drainage; verify any proposed US Pro kit and installation requirements separately.

Will an S1 or S1 Pro fit under my sofa?

eufy's shared furniture FAQ gives a robot height of 9.60 cm, a minimum furniture clearance of 10.2 cm, and a recommendation for 11 cm or more where possible. Measure the lowest brace along the whole route. The same FAQ warns that uneven, dark or reflective furniture undersides can interfere with sensing, so a height measurement alone is insufficient.

Can I use E25 replacement parts in an S1?

Check each part separately. The current T29C00A1 roller-mop page explicitly includes E25, S1 and S1 Pro in its fit list. The E25/E28 accessories package names only E25 and E28, so that roller overlap does not establish compatibility for its filter, bags or complete kit. S1-family cleaner and filter have their own documented identifiers in the parts table below.

Related guides