Skip to content

Explainer

eufy X10 Pro Omni: What to Buy Now and Which Parts Fit

Check the refurbished eufy X10 Pro Omni, compare E25 and refurbished C20 alternatives, and match replacement kits, mop cloths, dust bags and the US station.

By thisSWEEP EditorialUpdated November 6, 20269 min read7 picks

Our recommendation: eufy Omni E25 (T2353)

A new complete robot

Limit: The maker recommends no-go zones for carpets thicker than about 26 mm and for very light or thin rugs, so thick carpet is a weak fit

On this page · Quick picks: a complete robot or parts for your X10?

For a new vacuum and mop, our starting pick here is the Omni E25; the original US X10 listing says it is no longer available. A complete refurbished X10 Pro Omni is available from eufy with a three-month warranty. Existing X10 owners should choose the matched maintenance kit, individual consumables or replacement station below; low-furniture shoppers can consider the explicitly refurbished C20. This is a research-based buying guide using official specifications and manuals, without physical testing.

Availability checked 3 November 2026; links lead to the maker's exact pages. These recommendations address package fit and upkeep, rather than scoring real-world pickup or stain removal.

Quick picks: a complete robot or parts for your X10?

Compare specifications and all conditions

A new complete robot

Our pick
Omni E25
Deciding detail
Self-cleaning roller; heated drying and detergent dispensing

Only a rubber roller and guard

Deciding detail
Narrower package than the maintenance kit

Station dust bags

Deciding detail
Six bags; X10 Pro Omni / X8 Pro with Self-Empty Station
Full comparison table

Swipe to compare. Row labels stay visible.

Your needOur pickDeciding detail
A new complete robotOmni E25Self-cleaning roller; heated drying and detergent dispensing
Lower furniture; refurbished acceptableC20 refurbished, T2280111-F03.35-inch body; three-month warranty
Several worn X10 partseufy T29G00R1 maintenance kitBristle-and-rubber roller plus brush parts, filter and cloths
Only a rubber roller and guardeufy T29G10J1 packNarrower package than the maintenance kit
Spare mop clothseufy T29E7031 cloth packTwo washable cloths; X10 Pro Omni / X9 Pro documented
Station dust bagseufy T29F70A2 bag packSix bags; X10 Pro Omni / X8 Pro with Self-Empty Station
A confirmed station faulteufy T2351121-89 US stationReplacement station; cord and bag excluded
Your needOur pickDeciding detail
A new complete robotOmni E25Self-cleaning roller; heated drying and detergent dispensing
Lower furniture; refurbished acceptableC20 refurbished, T2280111-F03.35-inch body; three-month warranty
Several worn X10 partseufy T29G00R1 maintenance kitBristle-and-rubber roller plus brush parts, filter and cloths
Only a rubber roller and guardeufy T29G10J1 packNarrower package than the maintenance kit
Spare mop clothseufy T29E7031 cloth packTwo washable cloths; X10 Pro Omni / X9 Pro documented
Station dust bagseufy T29F70A2 bag packSix bags; X10 Pro Omni / X8 Pro with Self-Empty Station
A confirmed station faulteufy T2351121-89 US stationReplacement station; cord and bag excluded

eufy's own pages listed these X10 accessories as available when checked. Recheck your selected package before ordering.

Is a remaining X10 bundle worth buying?

The old solution bundle, bag bundle and renewed X10 paths each returned unavailable X10 content.

eufy's current refurbished X10 Pro Omni listing, T2351111-F0, was available when checked and carries a three-month warranty. The page describes an All-in-One Station and lists essential accessories including the charging base, brushes and filter. Its condition notice allows minor cosmetic imperfections. Check the condition and exact included accessories before ordering.

The original X10 manual lists the robot, Omni Station, detachable base and regional power cord in the complete package. A station accessory listing cannot establish those same contents.

  1. Match the exact model

    Require X10 Pro Omni identification for both robot and station.

  2. Confirm condition and contents

    Ask whether the offer is new, refurbished or used, and require an explicit included-parts list.

  3. Confirm support before paying

    Get the seller-specific warranty, return terms and regional match in writing.

The X10 manual says warranty varies by seller and channel; its stated minimum is 12 months for the main unit, battery and station, excluding consumables. The refurbished listing's three-month warranty is the term to check for that offer.

X10 vs E25 vs C20: what the specifications establish

Robot body height

X10 Pro Omni: owner reference
4.47 in
Omni E25
4.37 in / 111 mm
Omni C20 design; refurbished offer above
3.35 in / 85 mm

Mop mechanism

X10 Pro Omni: owner reference
Dual rotating pads
Omni E25
HydroJet self-cleaning roller
Omni C20 design; refurbished offer above
Dual rotating pads

Obstacle sensing

X10 Pro Omni: owner reference
RGB camera + LED; navigation LiDAR
Omni E25
RGB camera + LED
Omni C20 design; refurbished offer above
Infrared + point laser

Advertised suction

X10 Pro Omni: owner reference
8,000 Pa
Omni E25
20,000 Pa Turbo
Omni C20 design; refurbished offer above
7,000 Pa maximum

Standard vacuum-and-mop runtime

X10 Pro Omni: owner reference
136 minutes
Omni E25
110 or 125 minutes: conflicting tables
Omni C20 design; refurbished offer above
101 minutes

Mop drying

X10 Pro Omni: owner reference
Station washes and dries pads; temperature not reconfirmed
Omni E25
Hot air
Omni C20 design; refurbished offer above
Room-temperature air
Full comparison table

Swipe to compare. Row labels stay visible.

Published detailX10 Pro Omni: owner referenceOmni E25Omni C20 design; refurbished offer above
Robot body height4.47 in4.37 in / 111 mm3.35 in / 85 mm
Mop mechanismDual rotating padsHydroJet self-cleaning rollerDual rotating pads
Obstacle sensingRGB camera + LED; navigation LiDARRGB camera + LEDInfrared + point laser
Advertised suction8,000 Pa20,000 Pa Turbo7,000 Pa maximum
Standard vacuum-and-mop runtime136 minutes110 or 125 minutes: conflicting tables101 minutes
Mop dryingStation washes and dries pads; temperature not reconfirmedHot airRoom-temperature air
Published detailX10 Pro Omni: owner referenceOmni E25Omni C20 design; refurbished offer above
Robot body height4.47 in4.37 in / 111 mm3.35 in / 85 mm
Mop mechanismDual rotating padsHydroJet self-cleaning rollerDual rotating pads
Obstacle sensingRGB camera + LED; navigation LiDARRGB camera + LEDInfrared + point laser
Advertised suction8,000 Pa20,000 Pa Turbo7,000 Pa maximum
Standard vacuum-and-mop runtime136 minutes110 or 125 minutes: conflicting tables101 minutes
Mop dryingStation washes and dries pads; temperature not reconfirmedHot airRoom-temperature air

These are maker claims, not comparative cleaning results or whole-home coverage guarantees. The X10 page gives E25 combined Standard runtime as 110 minutes, while the C20 page's E25 column gives 125; the discrepancy remains unresolved. For a wider shortlist, see our eufy vs Roborock comparison.

Best new-robot starting point here: Omni E25

Choose the E25 when refreshing the roller during mopping and station detergent dispensing matter to you. The station also empties debris, washes the mop, dries with hot air and refills the robot. That feature set is the reason for this pick, rather than the suction headline.

The selected black US-page SKU is T2353112 although its URL still ends t2353111; match the selected package rather than the URL alone. The page separately offers white, an accessories package and E28. For short-pile carpet, eufy advises Vacuum Only; for medium or long pile, Carpet Avoidance, with no-go zones for dark carpets.

Lower-body alternative: refurbished Omni C20

The refurbished C20 is the lower-body choice here, but its three-month warranty and possible cosmetic wear are part of the decision. Its page lists an All-in-One Station and essential accessories including the charging base, brushes and filter.

The standard new C20 was unavailable when checked; the refurbished T2280111-F0 was available. Room-temperature drying is documented on the refurbished page. Choose it only if the condition and support terms suit you; do not mistake it for new stock.

Best broad X10 refresh: bristle-and-rubber kit eufy T29G00R1

eufy Replacement Parts Kit (T29G00R1) · Main view. Photo: eufy

The maintenance kit supplies one bristle-and-rubber roller, one brush guard, two side brushes, one washable filter and two mop cloths. Station bags are absent from its contents list. Choose it when several of those parts need replacing; otherwise buy the narrower pack you need.

There is an installation conflict: the kit page says no tools are required, but the X10 manual instructs you to remove the side brush with a screwdriver. Follow the model-specific manual for that step. Replacement frequency also conflicts: the kit page suggests replacing the kit every three to six months depending on use, while the manual gives component-specific intervals of six months for the rolling brush and three to six months for the mopping pads, filter, side brush and brush guard. Go by visible wear and the component-specific intervals rather than treating the kit as a mandatory simultaneous replacement.

Best targeted roller purchase: rubber roller and guard eufy T29G10J1

eufy Replacement Rubber Roller Brush and Brush Guard (T29G10J1) · Main view. Photo: eufy

The rubber-roller pack is separately listed for X10 Pro Omni and contains the roller and its matching brush guard. The side brushes, filter and cloths listed in T29G00R1 are outside this narrower pack. Choose by the construction and parts you want to replace. We have no comparative pickup or hair-wrap measurements supporting a universal upgrade claim.

Best cloth-only refill: eufy T29E7031

eufy 2 Washable Vacuum Mop Cloths (T29E7031) · Main view. Photo: eufy

The two washable mop cloths explicitly name X10 Pro Omni and X9 Pro in the detailed description. The title also adds C30, so the title and detailed fit list differ; this guide relies on their shared X10/X9 match. eufy limits its floor wording to well-sealed tile, hardwood and stone. Check your floor maker's wet-cleaning instructions too; the cloth material is not a blanket floor-safety guarantee.

Best bag-only refill: eufy T29F70A2 six-pack

eufy 6-Pack Large Capacity Dust Bags (T29F70A2) · Main view. Photo: eufy

The six-bag pack documents X10 Pro Omni and X8 Pro with Self-Empty Station compatibility. eufy instructs you to remove the full bag and insert a replacement using the guiding slots. Keep that station qualifier when matching the part. Do not assume the same bag fits C20, E25 or another station merely because it carries the Omni name.

Station replacement only: US eufy T2351121-89

eufy Omni Station Replacement Station (T2351121-89) · Front. Photo: eufy

The US replacement Omni Station is labeled Low Voltage, names X10 Pro Omni compatibility and excludes the power cord and dust bag. For the missing cord, eufy's US accessory page sells the black official option as T2276111-91; confirm that SKU with eufy when ordering rather than substituting a generic cord. X10 station functions include dust emptying, mop washing and drying, and robot water refilling. Have eufy confirm the regional replacement and fault before ordering; the Low Voltage label alone is not a numeric input specification.

The manual calls for a hard, level location against a wall, with 0.5 m clear on each side and 1.5 m in front; the product FAQ recommends 33.46 inches of overhead clearance for tank maintenance. The dimensions support page gives the same requirement as 850 mm of total height clearance for reaching and removing the water tanks, and advises against placing the station inside a wardrobe, since the moisture in the air can cause the wardrobe to become damp.

The station's own dimensions are stated three ways. The support page labels length × width × height as 365 × 480 × 460 mm. The X10 comparison table gives 14.41 × 18.90 × 18.11 inches, while its FAQ assigns L 14.41 × W 18.11 × H 18.90 inches; the FAQ swaps the width and height relationship implied by support, so the axes remain unresolved.

Home fit and the manual work that remains

For X10, avoid high-pile rugs and rugs thicker than 18 mm; fold tasseled edges underneath. eufy's carpet guidance for this model documents a 12 mm mop lift, with Vacuum Only recommended for low-pile carpet and Carpet Avoidance for medium to high pile; the lift figure is a mechanism specification, not a promise that a particular rug stays dry. C20 and E25 publish mop lifts of 10.4 mm and 10.8 mm respectively; neither figure establishes that your rug will stay dry. The C20 page describes a 3.35-inch body but separately cites 3.54-inch spaces and warns about furniture below 88 mm; the E25 FAQ warns about furniture below 116 mm. Body height alone is not usable clearance. For X10, the maker's stated passage requirements are also stricter than its 4.47-inch body height: the product FAQ's comparison column lists minimum height and width restrictions of 5.12 and 13.78 inches under and around furniture. Screen furniture openings against those restrictions, measuring the lowest brace and the narrowest route. For floor-finish decisions, use our hardwood robot-vacuum guide.

Measure threshold height, lip shape and approach space before choosing an alternative. The C20 and E25 tables advertise climb heights of 18 mm and 21 mm respectively without defining the threshold geometry. The X10 table advertises 0.83 in of obstacle clearance, while the manual separately warns that the robot may climb onto objects under 0.79 in / 20 mm; that warning is not a threshold-pass specification. Use those figures to screen candidates, then ask eufy about your actual threshold; they are not verified climbing results.

If a second floor is the reason you considered a second station, eufy documents a multi-floor mopping workflow that keeps the Omni Station where it is. After updating the robot to firmware 2.1.0 or newer, fill the robot's built-in tank and wash the mop at the station first, then send it to the other floor; if the water becomes insufficient, the remaining areas are swept but not mopped. Try that documented workflow before buying another station.

The X10 manual specifies a 2.4 GHz Wi-Fi band and account creation for app setup; the app provides schedules, modes and no-go zones. We have not established current offline-map behavior or subscription terms from these sources, so do not assume local-only operation or subscription-free access to every feature.

The X10 manual still requires dirty-water-tank and cleaning-tray care; the E25 FAQ also calls for regular roller and dirty-tank cleaning. Automatic dock functions reduce individual chores; they do not remove the maintenance checklist.

The X10 manual says to clear cords and small objects, use eufy-designated cleaning solution without hot water, and air-dry the washed dust box and filter completely before reuse.

  • Yes: Clear cords and small objects before an X10 run
  • Yes: Use eufy-designated X10 cleaning solution; keep hot water out of its tank
  • Yes: Let the washed X10 dust box and filter dry completely before reuse

How we choose

We check exact US product pages, condition notices, model-specific manuals and manufacturer comparison columns. Each part above has its own documented fit; another robot's adjacent table column is not compatibility evidence. We make no physical-testing claims, leave unresolved specifications visible and separate manufacturer features from measured cleaning performance. Selection follows the buying job; see our disclosure.

Verdict

For a new complete robot, start with the E25, subject to its floor and furniture limits. Consider the refurbished C20 for the lower body only when its condition and short warranty work for you. Keep a functioning X10 supplied with the broad kit, rubber roller, cloths or bags it actually needs. Buy the replacement station only after confirming the fault, regional match and excluded parts. For a complete X10, eufy's refurbished T2351111-F0 was available with a three-month warranty; check condition and included accessories before ordering.

The short answer

#1 · A new complete robot
eufy Omni E25 robot vacuum docked in its Omni station, front view on a white background

eufy · T2353

Robot Vacuum Omni E25

Robot height (maker)
112 mm
Mop system
roller
Navigation
LiDAR
Check
The maker recommends no-go zones for carpets thicker than about 26 mm and for very light or thin rugs, so thick carpet is a weak fit
#2
eufy Omni C20 renewed robot vacuum with all-in-one station, front view on white

eufy · T2280111-F0

eufy T2280111-F0

Robot height (maker)
85 mm
Suction (maker claim)
7,000 Pa
Maps, app & connection
eufy Clean app
Wi-Fi and Bluetooth; account required for app features
Choose
Lower furniture; refurbished acceptable
Check
7,000 Pa is the maker's claim, not a measured cleaning score, and is below eufy's flagship ratings
#3 · Several worn X10 parts

eufy T29G00R1 maintenance kit

Check
There is an installation conflict: the kit page says no tools are required, but the X10 manual instructs you to remove the side brush with a screwdriver.
More picks (4)
  1. 4

    Only a rubber roller and guard

    eufy T29G10J1 pack

    Choose for: Only a rubber roller and guard

    Check before buying: We have no comparative pickup or hair-wrap measurements supporting a universal upgrade claim.

  2. eufy 2 Washable Vacuum Mop Cloths for eufy X10 Pro Omni and X9 Pro (T29E7031)
    5

    Spare mop cloths

    eufy T29E7031

    eufy X10 Pro Omni, X9 Pro (eufy lists C30 as compatible in the product title) · T29E7031 part

    Choose for: Spare mop cloths

    Check before buying: Does not fit most other eufy lines; check the exact robot model before ordering

  3. eufy 6-Pack Large Capacity Dust Bags for X10 Pro Omni (T29F70A2)
    6

    Station dust bags

    eufy T29F70A2

    eufy X10 Pro Omni; X8 Pro with Self-Empty Station · T29F70A2 part

    Choose for: Station dust bags

    Check before buying: Fits only the two named self-empty setups

  4. 7

    A confirmed station fault

    eufy T2351121-89 US station

    Choose for: A confirmed station fault

    Check before buying: Have eufy confirm the regional replacement and fault before ordering; the Low Voltage label alone is not a numeric input specification.

Frequently asked questions

Is the eufy X10 Pro Omni discontinued?

The original US X10 product page says it is no longer available; that does not establish production status. eufy's current refurbished X10 Pro Omni listing, T2351111-F0, was available when checked and carries a three-month warranty. Check its refurbished condition and included accessories before ordering.

Which X10 Pro Omni replacement kit should I buy?

Choose T29G00R1 for a bristle-and-rubber roller, brush guard, two side brushes, one washable filter and two mop cloths. Choose T29G10J1 when you want the separately listed rubber roller and matching guard. Buy station bags separately; they are outside those listed kit contents. We have no comparative cleaning evidence that makes either roller the universal better choice.

Does the replacement X10 Omni Station include a robot, power cord or bag?

The US T2351121-89 page describes a replacement Omni Station compatible with the X10 Pro Omni and explicitly excludes the power cord and dust bag. The original complete-package manual separately lists the robot, station, detachable base and regional power cord. Use the replacement listing's own contents, confirm the regional match with eufy, and diagnose the fault before ordering a station.

Should I choose the Omni E25 or C20 instead of an X10?

Our new-robot starting pick is the E25 for its self-cleaning roller and station with heated drying and automatic detergent dispensing. The C20 offers a lower 3.35-inch body and room-temperature mop drying. The verified C20 alternative here is explicitly refurbished with a three-month warranty; the standard new C20 page was unavailable at the check. Choose around furniture clearance, floor care and acceptable condition.

Will the X10 Pro Omni keep every rug dry and avoid all clutter?

Do not assume either outcome. The X10 manual says to avoid high-pile rugs and rugs thicker than 18 mm, fold tasseled edges underneath, and remove cords and small objects before cleaning. It documents an RGB camera as well as navigation LiDAR. Those features do not establish suitability for an unlisted rug or remove the need to prepare the floor.

Related guides