Skip to content

Explainer

Roborock Qrevo Packages

Original, S Pro, Pro and 2 Pro Explained

Match original Qrevo, S Pro, Pro and 2 Pro packages by robot and dock codes. Compare mop handling, dock space, included parts and replacement-part buying traps.

By thisSWEEP EditorialUpdated November 3, 20267 min read2 picks

Our recommendation: Roborock Qrevo S Pro (RR-QrevoSPro5-M1)

Best for mostly hard floors

Limit: Requires the Roborock app; the maker states the product will not function as intended without it

On this page · Quick picks

For a Roborock Qrevo robot vacuum with multifunctional dock, our pick for mostly hard floors is Qrevo S Pro; choose Qrevo 2 Pro when you want the robot to leave its mops at the dock before carpet vacuuming. Qrevo Pro with Multifunctional Dock 2.0 identifies a different configuration from Qrevo 2 Pro. Match the full robot name and dock label before comparing an offer.

Quick picks

  • Mostly hard floors: Qrevo S Pro. Dual spinning mops, an all-rubber main brush and a dock that washes, dries, empties and refills the robot.
  • Mixed floors with a removable-mop routine: Qrevo 2 Pro. Automatic mop removal and a DuoDivide main brush are the reasons to choose it; check the carpet restriction below.
  • Already comparing original Qrevo or Qrevo Pro? Use their identity rows below before evaluating an older package. Do not transfer the newer models’ specifications.

These recommendations use manufacturer specifications. The purchase links lead to Roborock because exact Amazon packages have not been verified.

Resolve the name, robot and included dock together

The table pairs names with US FCC-manual configurations. Treat these codes as checks against the offered package, rather than assuming every listing with “Qrevo” contains the same station.

Original Q Revo / Qrevo

Robot / dock identity
QX0PEA / EWFD11LRR or EWFD12LRR
Published suction claim
5,500 Pa
Mopping distinction
Auto mop lifting
All specifications
Dock identity and care
Original Empty Wash Fill Dock; room-temperature mop washing

Qrevo S Pro

Robot / dock identity
RRE0PEE / EWFD24LRR
Published suction claim
18,500 Pa
Mopping distinction
Dual spinning mops; up to 10 mm module lift
All specifications
Dock identity and care
Multifunctional Dock; heated mop cleaning

Qrevo Pro / Q Revo Pro

Robot / dock identity
QR1PES / EWFD16LRR for the tank dock
Published suction claim
7,000 Pa
Mopping distinction
FlexiArm edge mop; up to 10 mm lift
All specifications
Dock identity and care
Multifunctional Dock 2.0; hot-water wash and dirt detection

Qrevo 2 Pro

Robot / dock identity
RRE0QUI / EWFD63LRR
Published suction claim
20,000 Pa and 18,500 Pa conflict on the US page
Mopping distinction
FlexiArm mop; 0.591-inch module lift; automatic mop removal
All specifications
Dock identity and care
Redesigned Multifunctional Dock; heated washing and detachable tray
Full comparison table

Swipe to compare. Row labels stay visible.

Full robot nameRobot / dock identityPublished suction claimMopping distinctionDock identity and care
Original Q Revo / QrevoQX0PEA / EWFD11LRR or EWFD12LRR5,500 PaAuto mop liftingOriginal Empty Wash Fill Dock; room-temperature mop washing
Qrevo S ProRRE0PEE / EWFD24LRR18,500 PaDual spinning mops; up to 10 mm module liftMultifunctional Dock; heated mop cleaning
Qrevo Pro / Q Revo ProQR1PES / EWFD16LRR for the tank dock7,000 PaFlexiArm edge mop; up to 10 mm liftMultifunctional Dock 2.0; hot-water wash and dirt detection
Qrevo 2 ProRRE0QUI / EWFD63LRR20,000 Pa and 18,500 Pa conflict on the US pageFlexiArm mop; 0.591-inch module lift; automatic mop removalRedesigned Multifunctional Dock; heated washing and detachable tray
Full robot nameRobot / dock identityPublished suction claimMopping distinctionDock identity and care
Original Q Revo / QrevoQX0PEA / EWFD11LRR or EWFD12LRR5,500 PaAuto mop liftingOriginal Empty Wash Fill Dock; room-temperature mop washing
Qrevo S ProRRE0PEE / EWFD24LRR18,500 PaDual spinning mops; up to 10 mm module liftMultifunctional Dock; heated mop cleaning
Qrevo Pro / Q Revo ProQR1PES / EWFD16LRR for the tank dock7,000 PaFlexiArm edge mop; up to 10 mm liftMultifunctional Dock 2.0; hot-water wash and dirt detection
Qrevo 2 ProRRE0QUI / EWFD63LRR20,000 Pa and 18,500 Pa conflict on the US pageFlexiArm mop; 0.591-inch module lift; automatic mop removalRedesigned Multifunctional Dock; heated washing and detachable tray

Roborock explicitly says “Q Revo Pro” and “Qrevo Pro” are transitional spellings on its Pro page. The S Pro store page names S Pro, while the 2 Pro store page names 2 Pro. Arriving through a generic Qrevo search does not turn either page into evidence for the original robot. Keep the suffix in every comparison, manual lookup and parts order.

Best for mostly hard floors: Qrevo S Pro

Choose S Pro if your priority is a spinning-mop workflow with automatic dock care. Roborock documents an all-rubber main brush, an anti-tangle side brush, PreciSense LiDAR navigation and structured-light obstacle sensing. Its advertised suction is 18,500 Pa, and the mop modules lift up to 10 mm.

The dock provides mop cleaning, warm-air drying, dust emptying and robot-tank refilling. The 167°F cleaning figure is measured at the internal heater output, not at the mop. Choose it for that documented workflow; the temperature and suction figures are not measured cleaning results from thisSWEEP.

For the US Black option, the official SKU is RR-QrevoSPro5-M1; White is RR-QrevoSPro0-M1. Do not interpret “S Pro” as an instruction to order parts labelled merely “Qrevo S.” Keep the complete suffix when requesting a replacement.

Check the exact S Pro package at Roborock

Best for removable-mop carpet routines: Qrevo 2 Pro

The useful upgrade here is Auto Mop Removal: the robot leaves its mops at the dock before carpet cleaning and reattaches them afterward. Roborock says this feature must be enabled manually in the app. It also documents a DuoDivide main brush, a reversible side brush, an extending FlexiArm mop and 0.591-inch mop-module lifting.

There is a suction conflict to keep visible: the US feature page says 20,000 Pa in its heading and 18,500 Pa in its motor display. Do not make the purchase depend on that unresolved number. Brush design and mop removal give a clearer reason to choose this package.

The dock advertises 149°F washing at the internal heater output, rather than at the mop itself. The US page still marks Target Area Re-Mop as arriving through an upcoming software update; do not buy specifically for that promised feature. The official White SKU is RR-Qrevo2Pro0-M1; Black is RR-Qrevo2Pro5-M1.

Check the exact Qrevo 2 Pro package at Roborock

Original Qrevo and Qrevo Pro: identify an older package

The original’s 5,500 Pa and room-temperature mop washing belong to the original Qrevo column of Roborock’s comparison, not to S Pro. Qrevo Pro instead has a 7,000 Pa claim, FlexiArm edge mopping and Multifunctional Dock 2.0, including dirt detection and hot-water washing. Roborock quotes 140°F for the Pro wash.

Roborock Qrevo S Pro (RR-QrevoSPro5-M1) · Front. Photo: Roborock

The Pro manual separately names EWFD20LRR as “Empty Wash Fill Dock Auto”; the Pro tank configuration covered here uses EWFD16LRR. The feature page restricts refill-and-drainage availability to certain regions and countries. Check the actual package before planning a water connection. For the separate Pro-versus-Master decision, use our Qrevo Pro vs Qrevo Master comparison.

Check floor fit and station service space

S Pro and 2 Pro both list a 3.80-inch robot height. Use that as a starting measurement, then check the full route under furniture and across thresholds. Do not order a tight-fit installation without confirming operating clearance and threshold geometry for the exact model.

S Pro

Dock dimensions, maker’s displayed sequence
13.39 × 19.17 × 20.43 inches
Reserved space specified by the FCC manual
At least 0.9 m high × 0.4 m wide × 1.2 m deep

2 Pro

Dock dimensions, maker’s displayed sequence
15.83 × 19.45 × 17.72 inches
Reserved space specified by the FCC manual
At least 0.82 m high × 0.42 m wide × 1.2 m deep
Full comparison table

Swipe to compare. Row labels stay visible.

PackageDock dimensions, maker’s displayed sequenceReserved space specified by the FCC manual
S Pro13.39 × 19.17 × 20.43 inchesAt least 0.9 m high × 0.4 m wide × 1.2 m deep
2 Pro15.83 × 19.45 × 17.72 inchesAt least 0.82 m high × 0.42 m wide × 1.2 m deep
PackageDock dimensions, maker’s displayed sequenceReserved space specified by the FCC manual
S Pro13.39 × 19.17 × 20.43 inchesAt least 0.9 m high × 0.4 m wide × 1.2 m deep
2 Pro15.83 × 19.45 × 17.72 inchesAt least 0.82 m high × 0.42 m wide × 1.2 m deep

Use the manual’s reserved space for installation, then check that you can remove the tanks, reach the bag compartment and rinse the tray. A dock’s body dimensions alone should not decide cabinet fit.

  • Yes: Mostly hard floors: shortlist S Pro for its spinning mops and automatic dock care
  • Yes: Carpet vacuuming with mops left behind: shortlist 2 Pro after enabling Auto Mop Removal
  • Partly: Furniture gaps and thresholds: confirm the exact route before ordering
  • No: High-pile carpet: do not override either FCC manual’s restriction

Both FCC manuals support 2.4 GHz Wi-Fi only. S Pro’s feature page requires the Roborock app and acceptance of its terms; 2 Pro’s mop-removal setting also depends on the app. For an account, subscription, camera or local-only-map requirement, seek explicit confirmation before ordering; these package comparisons do not establish those conditions.

Buy replacement parts by exact model

Start with the robot code, dock code and the part being replaced. Keep the filter and brush decisions separate.

Original Qrevo

Official replacement identity
RR-LW2-QRevo-02 washable filters, 2 pieces
Buying decision
Original Qrevo only; the listing excludes other Qrevo-series models

Qrevo Pro

Official replacement identity
RR-LW0-QrevoMaxV-P02 washable filters, 2 pieces
Buying decision
Pro is explicitly named; do not substitute the original-only filter

Original Qrevo and Pro

Official replacement identity
RR-S7-ZS-02 main brush
Buying decision
Both are explicitly named by the maker
Full comparison table

Swipe to compare. Row labels stay visible.

Confirmed robotOfficial replacement identityBuying decision
Original QrevoRR-LW2-QRevo-02 washable filters, 2 piecesOriginal Qrevo only; the listing excludes other Qrevo-series models
Qrevo ProRR-LW0-QrevoMaxV-P02 washable filters, 2 piecesPro is explicitly named; do not substitute the original-only filter
Original Qrevo and ProRR-S7-ZS-02 main brushBoth are explicitly named by the maker
Confirmed robotOfficial replacement identityBuying decision
Original QrevoRR-LW2-QRevo-02 washable filters, 2 piecesOriginal Qrevo only; the listing excludes other Qrevo-series models
Qrevo ProRR-LW0-QrevoMaxV-P02 washable filters, 2 piecesPro is explicitly named; do not substitute the original-only filter
Original Qrevo and ProRR-S7-ZS-02 main brushBoth are explicitly named by the maker

Use the maker’s original-filter listing, Pro-filter listing and main-brush listing to identify the part; check availability when ordering.

Mop-pad conflict: RR-TB2-QRevo-04 is headed 4 pieces, while its description says 2 pieces. The store names original Qrevo and Pro together, but Pro support says their mop cloths are incompatible. Get both fit and quantity resolved before buying that pack; the guide does not treat it as a confirmed interchangeable pad.

The replacement listings checked above do not explicitly establish S Pro or 2 Pro brush, filter or pad SKUs. Ask Roborock for a match to their codes instead of borrowing a Qrevo S or Saros part number.

For bags, S Pro’s official page recommends the RR-CDYCX0-QRevo-06 six-bag pack, whose title lists the Qrevo family. For 2 Pro, confirm the exact dock match rather than treating the family label as universal compatibility.

Verify the complete offer before ordering

S Pro and 2 Pro each list one robot, one multifunctional dock, one dock base, one power cable, one rotating-mop-module set and one user manual in the box. Do not count spare bags, filters, detergent or extra pads as included unless the selected package explicitly lists them. For an original or Pro package, obtain its own contents list rather than copying the newer box list.

  1. Read the full name

    Match the suffix and color to the selected official package.

  2. Match both labels

    Confirm the robot and dock codes against the manual configurations above.

  3. Confirm the contents

    Require the robot, station, base, cable and mop modules; identify any promised spares separately.

  4. Check home fit

    Confirm carpet permission, furniture access, thresholds, station approach and tank access.

  5. Confirm the actual offer

    Check seller, condition, region, availability and the selected bundle before paying.

If the offer cannot establish its robot, dock or usable contents, keep it off the shortlist. Use best self-emptying robot vacuums for a broader choice, or the exact-model S5V and Edge S5A guides when those names appear on the package.

How we choose

We compare official US product pages, FCC manuals, package lists and maker replacement-part listings. Separate robot and dock codes anchor the recommendations; contradictions and missing matches remain visible. This is document research, with no physical product testing. Commissions do not decide a pick (disclosure).

Verdict

Choose S Pro for its documented spinning-mop and dock-care workflow, or 2 Pro for automatic mop removal before carpet vacuuming, subject to the manual’s carpet restriction. Keep original Qrevo and Pro specifications attached to their own robot-and-dock codes. A complete, matched package is the purchase to verify; an unresolved suffix, dock or replacement-part match is a reason to pause.

The short answer

#1 · Best for mostly hard floors
Roborock Qrevo S Pro robot vacuum and mop, black body, shown whole from the front on a white background

Roborock · RR-QrevoSPro5-M1

Roborock Qrevo S Pro

Robot height (maker)
96.5 mm
Robot width
350 mm
Mop lift (maker)
10 mm
Check
Requires the Roborock app; the maker states the product will not function as intended without it
#2

Qrevo 2 Pro

Choose
Best for removable-mop carpet routines
Check
Do not make the purchase depend on that unresolved number.

Frequently asked questions

Is Qrevo S Pro the original Q Revo?

Treat them as separate models. The original FCC manual identifies QX0PEA with EWFD11LRR or EWFD12LRR docks; the S Pro FCC manual identifies RRE0PEE with EWFD24LRR. A generic Qrevo search or a similar package name does not settle which robot you are buying. Match the complete name and both labels.

Is Qrevo Pro with Multifunctional Dock 2.0 the same as Qrevo 2 Pro?

No. Roborock names Multifunctional Dock 2.0 on its Qrevo Pro page. Its Pro FCC manual identifies QR1PES and the standard EWFD16LRR dock. The separate Qrevo 2 Pro FCC manual identifies RRE0QUI with EWFD63LRR. Qrevo 2 Pro adds documented automatic mop removal; the numeral in the robot name must not be inferred from a dock generation.

Can Qrevo 2 Pro clean high-pile carpet?

Do not assume it can. The US product page promotes Auto Mop Removal for high-pile carpets, but the FCC manual says not to use the product on high pile carpets. That is an unresolved conflict in Roborock’s own documents. For a purchase dependent on high-pile compatibility, get clarification for the exact robot and carpet before ordering.

Do the original Qrevo and Qrevo Pro use the same filters and pads?

The filter listings are separate: RR-LW2-QRevo-02 is for the original Qrevo only; RR-LW0-QrevoMaxV-P02 lists Qrevo Pro. Pads need more caution: the store groups original Qrevo and Pro under one cloth listing, while Pro support says their mop cloths are incompatible. Ask Roborock to resolve the exact cloth fit and pack quantity before buying.

Related guides