Skip to content

Comparison

Roborock Saros 10 vs 10R

Mops, Navigation and Dock Fit

Choose between Roborock Saros 10 and 10R with a mop comparison, robot heights, threshold limits, dock service clearances and US bundle checks before buying.

By thisSWEEP EditorialUpdated November 5, 20268 min read2 picks

On this page · The short answer

The short answer

#2

Saros 10

Choose
VibraRise 4.0, plus a separate edge mop
Check
Roborock specifies 4,000 vibrations per minute in each of two zones, with up to 8 N downward pressure; the pressure maximum requires an app-enabled deep-cleaning function.

Choose the Saros 10R as the starting pick if you want spinning mops and its dock fits; choose the Saros 10 for a vibrating main mop or a dock location with less available depth. Both have RGB cameras, and neither earns our recommendation for high-pile carpet given the restrictions in their US manuals.

This comparison covers the US tank-dock bundles. On November 2, 2026, both the 10 US store and 10R store displayed “Out of stock, coming soon!” Treat the picks as conditional on availability.

Quick picks

Compare specifications and all conditions

You specifically want spinning mops

Choose
Saros 10R
Reason to choose it
Dual spinning mops and StarSight navigation

You specifically want a vibrating main pad

Choose
Saros 10
Reason to choose it
VibraRise 4.0, plus a separate edge mop

Dock depth is tight

Choose
Check Saros 10 first
Reason to choose it
Its manual reserves 1 m depth versus 1.2 m for the 10R; check width and height too

High-pile carpet is essential

Choose
Neither on this evidence
Reason to choose it
Both US manuals say not to use them there
Full comparison table

Swipe to compare. Row labels stay visible.

Your deciding constraintChooseReason to choose it
You specifically want spinning mopsSaros 10RDual spinning mops and StarSight navigation
You specifically want a vibrating main padSaros 10VibraRise 4.0, plus a separate edge mop
Dock depth is tightCheck Saros 10 firstIts manual reserves 1 m depth versus 1.2 m for the 10R; check width and height too
High-pile carpet is essentialNeither on this evidenceBoth US manuals say not to use them there
Your deciding constraintChooseReason to choose it
You specifically want spinning mopsSaros 10RDual spinning mops and StarSight navigation
You specifically want a vibrating main padSaros 10VibraRise 4.0, plus a separate edge mop
Dock depth is tightCheck Saros 10 firstIts manual reserves 1 m depth versus 1.2 m for the 10R; check width and height too
High-pile carpet is essentialNeither on this evidenceBoth US manuals say not to use them there

Sources: Saros 10 overview, 10R store, 10 US manual and 10R US manual.

Saros 10 vs 10R comparison table

Figures are manufacturer claims. Dock dimensions retain the pages' printed order; placement envelopes specify width, depth and height.

Saros 10, US tank bundle

Robot / dock hardware identifiers
S90VER / EWFD32LRR
Included dock family
RockDock Ultra 2.0
Navigation
RetractSense: retractable LDS/LiDAR
All specifications
Obstacle sensing
Reactive AI 3.0; front structured light, RGB camera, VertiBeam lateral sensing
Main mop / edge treatment
Vibrating main mop; independently lifting side mop
Automatic mop detachment
Vacuum Only / Vacuum Carpets First; within-job mode changes may lift instead
Robot dimensions
350 × 353 × 79.8 mm, LDS retracted; 93.5 mm tall with LDS elevated
Tank-dock dimensions
409 × 440 × 470 mm
Reserved dock space, width × depth × height
At least 0.42 m × 1 m × 0.8 m
Threshold claim
Up to 3 cm single layer; 4 cm double layer, comprising 3 cm plus 1 cm track
Water access
Manually serviced clean/dirty tanks

Saros 10R, US tank bundle

Robot / dock hardware identifiers
S91COP / EWFD28LRR
Included dock family
Multifunctional Dock 4.0
Navigation
StarSight Autonomous System 2.0: solid-state LiDAR / 3D ToF
All specifications
Obstacle sensing
3D sensors, RGB camera, VertiBeam lateral sensing
Main mop / edge treatment
Dual spinning mops; extending edge mop
Automatic mop detachment
Vacuum Only / Vacuum Carpet First; enable removal in the app
Robot dimensions
350 × 353 × 79.8 mm
Tank-dock dimensions
381 × 475 × 488 mm
Reserved dock space, width × depth × height
At least 0.4 m × 1.2 m × 0.75 m
Threshold claim
Up to 4 cm double layer; single-layer limit unresolved here
Water access
Manually serviced clean/dirty tanks
Full comparison table

Swipe to compare. Row labels stay visible.

FeatureSaros 10, US tank bundleSaros 10R, US tank bundle
Robot / dock hardware identifiersS90VER / EWFD32LRRS91COP / EWFD28LRR
Included dock familyRockDock Ultra 2.0Multifunctional Dock 4.0
NavigationRetractSense: retractable LDS/LiDARStarSight Autonomous System 2.0: solid-state LiDAR / 3D ToF
Obstacle sensingReactive AI 3.0; front structured light, RGB camera, VertiBeam lateral sensing3D sensors, RGB camera, VertiBeam lateral sensing
Main mop / edge treatmentVibrating main mop; independently lifting side mopDual spinning mops; extending edge mop
Automatic mop detachmentVacuum Only / Vacuum Carpets First; within-job mode changes may lift insteadVacuum Only / Vacuum Carpet First; enable removal in the app
Robot dimensions350 × 353 × 79.8 mm, LDS retracted; 93.5 mm tall with LDS elevated350 × 353 × 79.8 mm
Tank-dock dimensions409 × 440 × 470 mm381 × 475 × 488 mm
Reserved dock space, width × depth × heightAt least 0.42 m × 1 m × 0.8 mAt least 0.4 m × 1.2 m × 0.75 m
Threshold claimUp to 3 cm single layer; 4 cm double layer, comprising 3 cm plus 1 cm trackUp to 4 cm double layer; single-layer limit unresolved here
Water accessManually serviced clean/dirty tanksManually serviced clean/dirty tanks
FeatureSaros 10, US tank bundleSaros 10R, US tank bundle
Robot / dock hardware identifiersS90VER / EWFD32LRRS91COP / EWFD28LRR
Included dock familyRockDock Ultra 2.0Multifunctional Dock 4.0
NavigationRetractSense: retractable LDS/LiDARStarSight Autonomous System 2.0: solid-state LiDAR / 3D ToF
Obstacle sensingReactive AI 3.0; front structured light, RGB camera, VertiBeam lateral sensing3D sensors, RGB camera, VertiBeam lateral sensing
Main mop / edge treatmentVibrating main mop; independently lifting side mopDual spinning mops; extending edge mop
Automatic mop detachmentVacuum Only / Vacuum Carpets First; within-job mode changes may lift insteadVacuum Only / Vacuum Carpet First; enable removal in the app
Robot dimensions350 × 353 × 79.8 mm, LDS retracted; 93.5 mm tall with LDS elevated350 × 353 × 79.8 mm
Tank-dock dimensions409 × 440 × 470 mm381 × 475 × 488 mm
Reserved dock space, width × depth × heightAt least 0.42 m × 1 m × 0.8 mAt least 0.4 m × 1.2 m × 0.75 m
Threshold claimUp to 3 cm single layer; 4 cm double layer, comprising 3 cm plus 1 cm trackUp to 4 cm double layer; single-layer limit unresolved here
Water accessManually serviced clean/dirty tanksManually serviced clean/dirty tanks

Sources: 10 overview, 10R overview, and the 10 / 10R FCC manuals. Confirm hardware labels; later subrevisions remain unverified.

Dock footprint conflict: the 10 overview prints 409 × 440 × 470 mm; its US store reverses the first dimensions to 440 × 409 × 470 mm. Verify orientation for a tight cabinet; use the manual's placement envelope.

Saros 10R: the pick for spinning mops

Its US bundle page explicitly identifies dual spinning mops. The overview describes an extending mop for edges, plus a dock that empties dust, washes and dries mops, doses detergent, refills the robot and removes its mops.

Its camera rules out a camera-free requirement.

Check the exact Saros 10R bundle at Roborock.

Saros 10: the pick for a vibrating main mop

The 10 suits buyers who prefer its VibraRise 4.0 main mop and independently lifting edge mop. Roborock specifies 4,000 vibrations per minute in each of two zones, with up to 8 N downward pressure; the pressure maximum requires an app-enabled deep-cleaning function. Those are mechanism claims, not evidence that it removes more stains than the 10R. Official mechanism and conditions.

Its dock needs less reserved depth but more height and width than the 10R's. Check every dimension before paying extra.

Check the Saros 10 tank bundle at Roborock.

The 10 retracts its LDS under furniture; an upward range finder and top contact sensor help manage entry. The 10R uses solid-state LiDAR and 3D ToF for navigation, with an RGB camera for visual recognition. Both describe VertiBeam lateral obstacle sensing. Mapping hardware and object recognition are different jobs; these sensor inventories do not prove which robot will avoid your cables more reliably. 10 navigation, 10R navigation.

Both manuals tell owners to tidy cords before cleaning. Both specify 2.4 GHz Wi-Fi for app setup, and both overview pages say the app and acceptance of its terms are required for intended functionality. The 10 advertises offline voice commands; that does not establish offline map editing. The 10R's “no images are stored” statement does not establish local-only maps. Account requirements, map retention and paid-feature terms aren't documented by Roborock's model pages or manuals; no subscription-free claim is justified here.

Sources: 10 manual, 10R manual, 10 footnotes and 10R privacy statement. See LiDAR versus camera.

Spinning versus vibrating: plan around rugs

Both offer dock-based mop detachment for vacuum-only work. Enable removal on the 10R; on the 10, switching modes within a single task may lift the mop rather than detach it. A dedicated vacuum-only pass with detachment is the configuration to investigate for rugs that must avoid pad contact. Detachment does not establish that every carpet is suitable. 10 detachment footnote, 10R detachment instructions.

The 10R lift figures need qualification: its store page says 17 mm mop lift, while the overview says up to 22 mm away from the floor when the chassis is lifted. These have different wording and conditions; neither figure guarantees a dry rug. The 10's numerical main-mop lift remains unconfirmed. 10R store, overview footnote.

See the 10 manual, 10R manual and our spinning versus vibrating mop guide.

Low furniture and high thresholds: separate the measurements

The shared 79.8 mm low profile is a body dimension. The 10's 93.5 mm raised-LDS height is a different state; the 10R lists 79.8 mm overall. Neither source supplies a minimum furniture operating gap: a near-body-height opening remains unverified. 10 dimensions, 10R dimensions.

To scaleRobot height states on the same scale

Tap a label to explore. You can also hover or use your keyboard.

Shared scale: 0–93.5 mm

The low-profile dimension applies with the LDS lowered.

Sources: 1: The Saros 10 has different retracted and elevated LDS dimensions.
79.8 mm

The raised navigation sensor increases overall height.

Sources: 1: The Saros 10 has different retracted and elevated LDS dimensions.
93.5 mm

Roborock lists this overall height for the solid-state navigation model.

Sources: 2: Roborock lists the Saros 10R overall robot dimensions.
79.8 mm

Body dimensions only. These bars do not specify required furniture clearance or raised-chassis height.

Source notes2 references
  1. The Saros 10 has different retracted and elevated LDS dimensions.

    us.roborock.com — source for The Saros 10 has different retracted and elevated LDS dimensions.
    Robot (LDS Retracted) 13.78 x 13.90 x 3.14 inches (350 x 353 x 79.8 mm) Robot (LDS Elevated) 13.78 x 13.90 x 3.68 inches (350 x 353 x 93.5 mm)
  2. Roborock lists the Saros 10R overall robot dimensions.

    us.roborock.com — source for Roborock lists the Saros 10R overall robot dimensions.
    Robot 350*353*79.8 mm

The 10's 3 cm plus 1 cm track claim describes a stepped profile. The 10R's 4 cm claim also specifies a double layer; do not transfer the 10's single-layer limit to it. Measure rise, ledge depth, shape and approach space before relying on either claim. 10 conditions, 10R claim.

Dock fit, water access and variants

Use the manual placement envelopes in the table, not just the closed dock footprint. Both manuals require a hard, flat floor against a wall. The tank bundles still require filling clean water and emptying dirty water; automated robot refilling does not connect the dock to household plumbing. Both manuals specify cold tank water and Roborock-recommended solution in the separate cartridge. Confirm that your floor manufacturer permits wet mopping. 10 manual, 10R manual.

Check the dock location before choosing
  1. Reserve the full space

    Compare width, depth and height with the exact tank-dock manual.

  2. Rehearse water servicing

    Leave access to the tanks, lids, dust bag and cleaning tray; the closed footprint is insufficient.

  3. Match the label

    Confirm the robot, dock code, US power rating and tank configuration before ordering.

The Saros 10 with Refill & Drainage System is a separate configuration: its overview lists a 300 mm dock height, versus 470 mm for the tank dock. The FCC refill/drain manual identifies the Auto dock as EWFD33LRR and ties installation responsibility to authorized Roborock technicians; installation must comply with local regulations. The 10R overview also describes a refill/drain version with regional availability; an exact US plumbed bundle is not verified here. Do not assume either tank dock can be converted with a generic kit. 10 variants, FCC refill/drain manual, 10R regional qualification.

The 10's RR-Saros105-M1 black and RR-Saros100-M1 white are tank-bundle color variants; the 10R's default SKU is RR-Saros10R5-M2. Official variant data.

Replacement parts and deciding a premium

Match these official accessory codes rather than the Saros family name:

Main brush

Confirmed identity and fit
RR-ZS4-QrevoCurv-01; the accessory title explicitly names both 10 and 10R

Dock bags

Confirmed identity and fit
RR-CDYCX0-QRevo-06; six-bag pack linked by both bundle pages

Filters

Confirmed identity and fit
10: RR-LW0-Saros10-M02; 10R: RR-LW2-Saros10R-M02; two-filter packs

10 mop cloths

Confirmed identity and fit
Main: RR-TB2-Saros10-M02; edgewise: RR-YBTB2-Saros10-M02; two-cloth packs

10R mop cloths

Confirmed identity and fit
RR-KJTB4-Saros10R-M04; four-cloth pack for 10R / Z70; explicitly excludes Saros 10
Full comparison table

Swipe to compare. Row labels stay visible.

ItemConfirmed identity and fit
Main brushRR-ZS4-QrevoCurv-01; the accessory title explicitly names both 10 and 10R
Dock bagsRR-CDYCX0-QRevo-06; six-bag pack linked by both bundle pages
Filters10: RR-LW0-Saros10-M02; 10R: RR-LW2-Saros10R-M02; two-filter packs
10 mop clothsMain: RR-TB2-Saros10-M02; edgewise: RR-YBTB2-Saros10-M02; two-cloth packs
10R mop clothsRR-KJTB4-Saros10R-M04; four-cloth pack for 10R / Z70; explicitly excludes Saros 10
ItemConfirmed identity and fit
Main brushRR-ZS4-QrevoCurv-01; the accessory title explicitly names both 10 and 10R
Dock bagsRR-CDYCX0-QRevo-06; six-bag pack linked by both bundle pages
Filters10: RR-LW0-Saros10-M02; 10R: RR-LW2-Saros10R-M02; two-filter packs
10 mop clothsMain: RR-TB2-Saros10-M02; edgewise: RR-YBTB2-Saros10-M02; two-cloth packs
10R mop clothsRR-KJTB4-Saros10R-M04; four-cloth pack for 10R / Z70; explicitly excludes Saros 10

Sources: official 10 accessory data, 10R accessory data and 10R cloth compatibility.

For Black Friday bundles, match condition, hardware labels, water configuration, consumables and warranty. Include bags, pads, filters, brush and approved cleaner in your comparison. Pay extra for a mop preference or fit advantage you need. Roborock also lists Saros 20 models; consider current alternatives if these bundles are unavailable. Official range.

How we choose

We researched official US pages, accessory data and FCC manuals. No physical testing was performed. These specifications cannot establish relative pickup, stain removal or avoidance reliability. Unresolved facts stay visible; commissions do not decide picks (disclosure).

Verdict

Choose Saros 10R for spinning mops, or Saros 10 for a vibrating main mop and its different dock envelope. Resolve carpet restrictions, tight furniture gaps and uncertain thresholds before ordering.

Frequently asked questions

Is the Roborock Saros 10 or 10R better?

Start with the Saros 10R if you prefer dual spinning mops and its dock fits. Choose the Saros 10 for its vibrating main mop or when its different dock placement envelope suits your room. These are configuration recommendations from official specifications. The available manufacturer evidence does not establish a cleaning-performance winner, and neither is our recommendation for high-pile carpet because both US manuals prohibit that use.

Does the Saros 10R have a camera?

Yes. Roborock describes an RGB camera for visual obstacle recognition alongside the Saros 10R's 3D sensors. The Saros 10 also has an RGB camera. StarSight and RetractSense describe their different navigation systems; neither name means camera-free. The 10R page's statement that no images are stored does not establish local-only maps or remove the app requirements.

Will either Saros fit under a low sofa?

Treat a close fit as unverified. Roborock lists a 7.98 cm low profile for both, but the Saros 10 reaches that height with its LDS retracted and is taller with it raised. A body dimension is not a minimum operating-clearance specification. Measure the lowest opening and the space farther underneath; do not buy solely because a nominal sofa gap exceeds the advertised body height.

Can the Saros 10 and 10R climb a 4 cm threshold?

Both advertise up to 4 cm for double-layer thresholds, which does not establish climbing a single vertical step that tall. The Saros 10 page specifies a 3 cm single layer or a 3 cm threshold plus a 1 cm track. The captured 10R page does not give the same single-layer breakdown. Match the actual shape and approach, and treat these as manufacturer claims rather than verified results.

Are Saros 10 and 10R mop pads interchangeable?

Do not interchange them. Roborock's four-cloth Saros 10R and Saros Z70 pack explicitly excludes the Saros 10. The 10 uses a VibraRise main cloth and a separate edgewise cloth, whereas the 10R uses spinning mop modules. Some brush listings name both robots, but that does not establish compatibility for pads, filters, dock parts or a complete accessory kit.

Related guides