Buying guide
Eufy Robot Vacuum Filters
How to Change and Match the Right Part
Change your eufy robot vacuum filter and choose the correct replacement. Compare 11S MAX, original 11S, G30 revisions and X10 Pro Omni filter packs and kits.
By thisSWEEP EditorialUpdated November 10, 20267 min read4 picks
On this page · The short answer
The short answer
eufy MAX T29151N2
- Check
- The pack's G10 inclusion is useful because the mixed kit does not list that model.
eufy T29161N2
- Check
- The written kit contents do not call the filters washable, while its image metadata calls it a Non Washable Replacement Kit.

eufy · T29E80W1
Replacement Washable Filters
- Check
- Fits only the X10 Pro Omni, not other eufy robot models
More picks (1)
- 4

X10 mixed-kit choice
eufy X10 Pro Omni · T29G00R1 part
Choose for: X10 mixed-kit choice
Check before buying: Kit only; no robot, dock or detergent included
For an 11S MAX, release and empty the dust collector, remove the old filter, insert the matching replacement and push the collector back into the robot. T29151N2 is our filter-only pick for its listed robots and is explicitly non-washable; for X10 Pro Omni, choose the separate T29E80W1 washable two-filter pack. Match the complete model and the G30 purchase-date restriction below before ordering.
Quick picks
- Only filters, matched 11S MAX-family robot: eufy MAX T29151N2, two sets of non-washable unibody filters.
- Filters plus worn brushes, matched 11S MAX-family robot: eufy T29161N2, the separately itemized brush-and-filter kit.
- Only filters, X10 Pro Omni: eufy T29E80W1, two washable replacements.
- Several maintenance parts, X10 Pro Omni: eufy T29G00R1, the kit with a washable filter and bristle-and-rubber roller.
The original 11S is a different filter family. For that model, or a G30 with an uncertain purchase date, use the model selector rather than the first MAX accessory in a search result.
How to change the filter on a eufy robot vacuum
The 11S MAX manual describes a removable dust collector and a single removable filter. Disconnect power before maintenance as the manual directs, then follow this sequence; when replacing, insert the matched new filter at the refitting stage.
Release the collector
Press its release button and pull the dust collector out.
Empty it
Open the collector and empty the collected dirt.
Remove the filter
Lift out the old filter. For routine cleaning, the manual says to tap off dust.
Refit
Put the matching replacement into the collector, then push the collector back into the robot.
Original 11S: its manual has a different sequence: release and empty the collector, pull the pre-filter hooks, then remove the separate foam and high-performance filters. Reassemble those filters and the pre-filter before reinserting the collector. Its foam filter and pre-filter may be washed and thoroughly dried; its high-performance filter must stay out of water.
X10 Pro Omni: the model-specific manual says to power off and unplug before maintenance. Open the top cover, lift out the dust box, release its lid and empty it, then remove the filter. For cleaning, tap off dust, rinse the box and filter, and air-dry completely. Reinstall the filter in the box and return the box to the robot. When changing the filter, fit the correct dry replacement at that reassembly stage.
Match the robot before comparing packs
These are the US listings' exact model groups, not a claim that all eufy filters interchange. The filter pack and kit catalog entry have different fit lists.
11S MAX, 15C MAX, 25C MAX, 30C MAX; G15, G20, G20 Hybrid, G32 Pro
- Filter or kit identified by eufy
- T29151N2 filter pack or T29161N2 kit
- Buying restriction
- Match the complete model suffix
G10
- Filter or kit identified by eufy
- T29151N2 filter pack
- Buying restriction
- G10 appears in the filter list, but is absent from this kit's list
G30, G30 Edge, G30 Hybrid, G30 Verge
- Filter or kit identified by eufy
- Both older-family listings include these names
- Buying restriction
- Apply the G30 notice below; confirm an uncertain collector revision
G30 bought after August 14, 2023
- Filter or kit identified by eufy
- Eufy directs buyers to a G40 filter; the kit notice also specifies a G40 dust collector
- Buying restriction
- Do not order the older filter/kit on the strength of the G30 name alone
Original 11S
- Filter or kit identified by eufy
- T2906021: six sets of high-performance and foam filters in the catalog
- Buying restriction
- Excludes MAX models; availability conflict explained below
X10 Pro Omni
- Filter or kit identified by eufy
- T29E80W1 filters or T29G00R1 kit
- Buying restriction
- These listings establish X10 Pro Omni fit; do not extend it to other Omni models
Full comparison table
Swipe to compare. Row labels stay visible.
| Your robot or revision | Filter or kit identified by eufy | Buying restriction |
|---|---|---|
| 11S MAX, 15C MAX, 25C MAX, 30C MAX; G15, G20, G20 Hybrid, G32 Pro | T29151N2 filter pack or T29161N2 kit | Match the complete model suffix |
| G10 | T29151N2 filter pack | G10 appears in the filter list, but is absent from this kit's list |
| G30, G30 Edge, G30 Hybrid, G30 Verge | Both older-family listings include these names | Apply the G30 notice below; confirm an uncertain collector revision |
| G30 bought after August 14, 2023 | Eufy directs buyers to a G40 filter; the kit notice also specifies a G40 dust collector | Do not order the older filter/kit on the strength of the G30 name alone |
| Original 11S | T2906021: six sets of high-performance and foam filters in the catalog | Excludes MAX models; availability conflict explained below |
| X10 Pro Omni | T29E80W1 filters or T29G00R1 kit | These listings establish X10 Pro Omni fit; do not extend it to other Omni models |
Scroll horizontally to see every column
| Your robot or revision | Filter or kit identified by eufy | Buying restriction |
|---|---|---|
| 11S MAX, 15C MAX, 25C MAX, 30C MAX; G15, G20, G20 Hybrid, G32 Pro | T29151N2 filter pack or T29161N2 kit | Match the complete model suffix |
| G10 | T29151N2 filter pack | G10 appears in the filter list, but is absent from this kit's list |
| G30, G30 Edge, G30 Hybrid, G30 Verge | Both older-family listings include these names | Apply the G30 notice below; confirm an uncertain collector revision |
| G30 bought after August 14, 2023 | Eufy directs buyers to a G40 filter; the kit notice also specifies a G40 dust collector | Do not order the older filter/kit on the strength of the G30 name alone |
| Original 11S | T2906021: six sets of high-performance and foam filters in the catalog | Excludes MAX models; availability conflict explained below |
| X10 Pro Omni | T29E80W1 filters or T29G00R1 kit | These listings establish X10 Pro Omni fit; do not extend it to other Omni models |
The G30 notices use purchase date, not a manufacturing date or a serial-number range. They specifically name G30 without explaining every Edge, Hybrid or Verge revision. If the purchase date, variant or replacement dust collector makes the match uncertain, ask eufy to confirm the filter and collector; do not infer a revision from the shell's appearance.
Compare the exact packs
T29151N2
- Filters included
- 2 sets of unibody filters
- Other included parts
- Filter-only pack
- Water-care evidence
- Explicitly non-washable
T29161N2
- Filters included
- 2 sets of unibody filters
- Other included parts
- 4 side brushes, 1 rolling brush, 1 rolling-brush guard
- Water-care evidence
- Written contents omit care; image metadata says non-washable
T29E80W1
- Filters included
- 2 washable filters
- Other included parts
- Filter-only pack
- Water-care evidence
- Remove dust, rinse with water, dry completely
T29G00R1
- Filters included
- 1 washable filter
- Other included parts
- 1 bristle-and-rubber roller, 1 guard, 2 side brushes, 2 mop cloths
- Water-care evidence
- Filter explicitly called washable
Full comparison table
Swipe to compare. Row labels stay visible.
| Part | Filters included | Other included parts | Water-care evidence |
|---|---|---|---|
| T29151N2 | 2 sets of unibody filters | Filter-only pack | Explicitly non-washable |
| T29161N2 | 2 sets of unibody filters | 4 side brushes, 1 rolling brush, 1 rolling-brush guard | Written contents omit care; image metadata says non-washable |
| T29E80W1 | 2 washable filters | Filter-only pack | Remove dust, rinse with water, dry completely |
| T29G00R1 | 1 washable filter | 1 bristle-and-rubber roller, 1 guard, 2 side brushes, 2 mop cloths | Filter explicitly called washable |
Scroll horizontally to see every column
| Part | Filters included | Other included parts | Water-care evidence |
|---|---|---|---|
| T29151N2 | 2 sets of unibody filters | Filter-only pack | Explicitly non-washable |
| T29161N2 | 2 sets of unibody filters | 4 side brushes, 1 rolling brush, 1 rolling-brush guard | Written contents omit care; image metadata says non-washable |
| T29E80W1 | 2 washable filters | Filter-only pack | Remove dust, rinse with water, dry completely |
| T29G00R1 | 1 washable filter | 1 bristle-and-rubber roller, 1 guard, 2 side brushes, 2 mop cloths | Filter explicitly called washable |
Counts and care come from the MAX filter listing, MAX kit's catalog data, X10 filter listing and X10 kit listing. Compare the complete contents against the parts you actually need before checking current pack prices.
Filter-only choice: eufy T29151N2 for matched MAX and G-series robots
Choose this pack when the filter is the part you need and your exact robot appears in its fit list. Eufy specifies two sets of unibody filters and labels the selected version Filter Set-Non Washable. The pack's G10 inclusion is useful because the mixed kit does not list that model.
Its limits decide the purchase: original 11S is excluded, and a G30 bought after the stated cutoff is directed to a G40 filter. Do not buy it merely because the robot says RoboVac. For routine care, the 11S MAX manual's filter procedure is tapping off dust.
Check the exact T29151N2 pack on eufy.
Brush-and-filter choice: eufy T29161N2 for its listed robots
Choose this kit if you also need its four side brushes, rolling brush and brush guard. It includes two filter sets, so the reason to choose it over the filter pack is the extra brush parts, rather than a higher filter count.
Keep its care evidence separate. The written kit contents do not call the filters washable, while its image metadata calls it a Non Washable Replacement Kit. A different catalog entry, T29160N1, explicitly describes washable filters. That is a separate SKU, not permission to rinse the filters in T29161N2; keep them dry unless eufy confirms otherwise for the supplied part.
The direct kit URL currently opens eufy's accessory collection. Search the exact SKU and confirm the selected contents before checkout. For a post-cutoff G30, the kit notice specifies a G40 filter and dust collector.
Find or confirm T29161N2 with eufy.
X10 filter-only choice: eufy T29E80W1
For an X10 Pro Omni that only needs filters, start with this two-filter washable pack. Eufy's product description permits rinsing after removing dust and requires complete drying before reinstallation. A spare dry filter can be useful while the other dries; keep both within this exact model's documented fit.
Do not add a roller or mop-cloth kit just to replace a filter unless those parts also need attention. This pack gives the narrower purchase for that job.
Check the T29E80W1 filter pack on eufy.
X10 mixed-kit choice: eufy T29G00R1
Choose this kit when you need the X10's other listed maintenance parts too: one bristle-and-rubber roller, one guard, two side brushes, one washable filter and two mop cloths. It provides fewer replacement filters than the filter-only pack, so decide by the extras you need.
Eufy's listed contents do not include station dust bags. Plan bags separately if those are also due; do not treat an onboard filter and a station bag as the same purchase. For a wider system comparison, see our X10 Pro Omni versus Roborock Qrevo guide.
Check the T29G00R1 kit on eufy.
Original 11S, later G30 or no confirmed match
For original 11S, eufy's catalog identifies T2906021, with six sets of high-performance and foam filters, and explicitly excludes MAX models. There is an availability conflict: the catalog data marks this SKU available, but its direct product URL returns an accessory-unavailable page whose description says it is out of stock. Treat it as an identified part to confirm with eufy, rather than a dependable buy-now recommendation.
For a later G30, the G40 direction establishes the replacement family but does not give a replacement SKU in these notices. We have not established an exact orderable G40 part here. Use eufy support with the full model, purchase date, market and photos of the installed filter and dust collector. Ask for the matching part numbers and care instructions before ordering.
- Yes: Match the full robot name to the selected part's own fit list
- Yes: Check every extra part before choosing a mixed kit
- Partly: Resolve a G30 purchase-date or dust-collector uncertainty with eufy
- No: Treating another SKU's washable label as instructions for your filter
Cleaning and replacement timing
The 11S MAX manual recommends cleaning its filter weekly, or twice weekly with a pet, and replacing it every two months. The X10 Pro Omni manual recommends weekly filter cleaning and replacement every three to six months. Both say frequency depends on use. Follow your model's schedule and the installed part's care instructions rather than transferring one robot's interval to another.
For a washable X10 filter, wait until it is completely dry before refitting; the cited instructions specify dryness rather than a fixed drying time. For broader upkeep planning, see our self-emptying robot vacuum guide.
How we choose
These are research picks based on official US product descriptions, exact catalog entries and model-specific manuals. We prioritize documented model fit, pack contents and care instructions. Where the maker's pages disagree or omit a part number, we keep that uncertainty beside the buying decision. This guide does not report physical product testing. See our disclosure.
Verdict
Buy T29151N2 for filters alone on its confirmed robots; choose T29161N2 when its listed brush parts are needed too. For X10 Pro Omni, choose T29E80W1 for filters or T29G00R1 for the mixed kit. Original 11S and uncertain G30 revisions need the confirmation route above before purchase.
Frequently asked questions
Can you wash eufy robot vacuum filters?
Check the exact part. T29151N2 is explicitly non-washable. The original 11S manual permits washing its foam filter and pre-filter but prohibits washing its high-performance filter. X10 Pro Omni's T29E80W1 permits a water rinse after removing dust, followed by complete drying. Keep T29161N2 kit filters dry unless eufy confirms care instructions for the supplied filter.
Does a eufy 11S filter fit the 11S MAX?
No: eufy's T2906021 filter-set description lists the original 11S and explicitly excludes MAX models. T29151N2 lists 11S MAX and explicitly excludes the original 11S. Keep the full suffix when searching for a replacement; a shared brand or similar model name is insufficient to select the correct filter.
Which replacement filter does a newer eufy G30 need?
Eufy's T29151N2 listing says a G30 bought after August 14, 2023 needs the G40 filter. The T29161N2 kit listing specifies the G40 filter and dust collector for that situation. These notices use purchase date. If your date or installed collector is uncertain, ask eufy to identify both parts before ordering.
How often should I change a eufy robot vacuum filter?
Use the model's schedule. The 11S MAX manual recommends replacing its filter every two months and cleaning weekly, or twice weekly with a pet. The X10 Pro Omni manual recommends weekly filter cleaning and replacement every three to six months. Both manuals say frequency depends on usage; these are model-specific maintenance recommendations, not a universal lifespan.
eufy MAX T29151N2
Related guides

Buying guide · Bags & Filters
Roborock QV 35A Dust Bags: The Genuine Pack and Dock Check
Find the genuine Roborock QV 35A dust bag pack, check robot and dock labels, avoid the similar Q5 bags, and follow the official replacement and fault checks.

Buying guide · Bags & Filters
Roborock Replacement Dust Bags: Match Robot and Dock First
Find the right Roborock replacement dust bags by robot and dock. Compare genuine six-packs, check Qrevo and Pure variants, and avoid ordering an unverified fit.

Buying guide · Bags & Filters
Roomba 670 Replacement Filter: Correct Pack, Kit and Fit Checks
Find the correct Roomba 670 filter, compare the genuine filter pack and maintenance kit, avoid 700-series mix-ups, and follow the right dry-cleaning routine.