Buying guide
Robot Vacuum Dock Cabinets
Check Operating Clearance Before Buying
Hide your robot vacuum dock without blocking docking or tank access. Compare official station clearances, screen cabinet sizes, and choose an open location.
By thisSWEEP EditorialUpdated November 10, 20269 min read3 picks
On this page · The short answer
The short answer
Roborock Saros 10R, US tank bundle
- Choose
- You want a documented tank-dock example
- Check
- That describes the hardware; it does not establish an enclosure fit.
Dreame X50 Ultra, US standard bundle
- Choose
- You are comparing another mop station
- Check
- The manual requires removing the clean-water tank to fill it and the used-water tank to empty it; a shelf just above the closed base is not enough evidence of access.
Leave cabinet fit unknown
To hide a robot vacuum dock, start with the exact station manual and preserve its approach, ventilation and service access. Our first choice is an open wall location; the Roborock Saros 10R tank dock is our clearest documented sizing example. We found no verified cabinet match for the stations below, so the featured Giantex cabinet is a screening example, not a purchase recommendation for them.
Quick picks: choose the location before the cabinet
Compare specifications and all conditions
You already own a station
- Our choice
- Keep it openly placed while checking the manual
- What decides it
- Preserve the robot route and maintenance access before adding furniture
You want a documented tank-dock example
- Our choice
- Roborock Saros 10R, US tank bundle
- What decides it
- Manual gives reserved height, width and depth; confirm new-stock availability
You are comparing another mop station
- Our choice
- Dreame X50 Ultra, US standard bundle
- What decides it
- Explicit front and side gaps; tank access still needs checking
You own Shark Matrix RV2310AE
- Our choice
- Leave cabinet fit unknown
- What decides it
- The model page's generic product dimensions do not establish a complete dock envelope
You are considering the Giantex storage cabinet
- Our choice
- Skip it for these stations
- What decides it
- Published internal dimensions rule out Saros and X50; Shark is unverified
Full comparison table
Swipe to compare. Row labels stay visible.
| Your situation | Our choice | What decides it |
|---|---|---|
| You already own a station | Keep it openly placed while checking the manual | Preserve the robot route and maintenance access before adding furniture |
| You want a documented tank-dock example | Roborock Saros 10R, US tank bundle | Manual gives reserved height, width and depth; confirm new-stock availability |
| You are comparing another mop station | Dreame X50 Ultra, US standard bundle | Explicit front and side gaps; tank access still needs checking |
| You own Shark Matrix RV2310AE | Leave cabinet fit unknown | The model page's generic product dimensions do not establish a complete dock envelope |
| You are considering the Giantex storage cabinet | Skip it for these stations | Published internal dimensions rule out Saros and X50; Shark is unverified |
Scroll horizontally to see every column
| Your situation | Our choice | What decides it |
|---|---|---|
| You already own a station | Keep it openly placed while checking the manual | Preserve the robot route and maintenance access before adding furniture |
| You want a documented tank-dock example | Roborock Saros 10R, US tank bundle | Manual gives reserved height, width and depth; confirm new-stock availability |
| You are comparing another mop station | Dreame X50 Ultra, US standard bundle | Explicit front and side gaps; tank access still needs checking |
| You own Shark Matrix RV2310AE | Leave cabinet fit unknown | The model page's generic product dimensions do not establish a complete dock envelope |
| You are considering the Giantex storage cabinet | Skip it for these stations | Published internal dimensions rule out Saros and X50; Shark is unverified |
Keep your existing robot if you only need furniture. Our self-emptying robot guide covers choosing a system; our under-furniture guide addresses the robot's separate clearance problem.
Best documented sizing example: Roborock Saros 10R
Use the US tank bundle, identified in its manual as the S91COP robot with EWFD28LRR dock. Roborock publishes 381 × 475 × 488 mm for the dock, in the order shown on its overview page. That describes the hardware; it does not establish an enclosure fit.
The US manual reserves at least 0.75 m height, 0.4 m width and 1.2 m depth. Its diagram callouts instead say more than those values. Follow the stricter wording, and preserve the full reserved depth rather than subtracting the dock body.
The tank must lift out for filling, and the dust-container cover and cleaning tray need maintenance access. Roborock also says to avoid narrow or humid spaces, operate in well-ventilated areas and leave the dock location beacon unobstructed. Meeting the dimensions is only the start of the check.
Tap a label to explore. You can also hover or use your keyboard.
Front view: opening and overhead spaceUS tank dock only
Reserve more than 0.4 m in width and more than 0.75 m in height, following the stricter diagram labels. The clean-water tank must lift out; a low robot entrance alone does not provide service access.
Sources: 1: The Saros 10R US manual reserves at least 0.75 m height, 0.4 m width and 1.2 m depth; its diagram callouts use More than for those dimensions., 2: The clean-water tank lifts out for filling.- Horizontal dimension
- More than 0.4 m wide
- Vertical dimension
- More than 0.75 m high
- Access to preserve
- Tank removal and dock-front service
Side view: reserved approach spaceKeep the robot route open
The prose calls for at least 1.2 m in depth and the diagram label says more than 1.2 m. Preserve that reserve and keep the dock location beacon unobstructed. Do not interpret it as permission to close the dock inside furniture.
Sources: 1: The Saros 10R US manual reserves at least 0.75 m height, 0.4 m width and 1.2 m depth; its diagram callouts use More than for those dimensions., 3: Roborock requires the dock location beacon to remain unblocked.- Horizontal dimension
- More than 1.2 m reserved depth
- Vertical dimension
- More than 0.75 m high
- Access to preserve
- Robot route and location beacon
Full comparison table
Swipe to compare; option labels stay visible
| Option | Horizontal dimension | Vertical dimension | Access to preserve |
|---|---|---|---|
Front view: opening and overhead spaceUS tank dock onlyReserve more than 0.4 m in width and more than 0.75 m in height, following the stricter diagram labels. The clean-water tank must lift out; a low robot entrance alone does not provide service access. Sources: 1: The Saros 10R US manual reserves at least 0.75 m height, 0.4 m width and 1.2 m depth; its diagram callouts use More than for those dimensions., 2: The clean-water tank lifts out for filling. | More than 0.4 m wide | More than 0.75 m high | Tank removal and dock-front service |
Side view: reserved approach spaceKeep the robot route openThe prose calls for at least 1.2 m in depth and the diagram label says more than 1.2 m. Preserve that reserve and keep the dock location beacon unobstructed. Do not interpret it as permission to close the dock inside furniture. Sources: 1: The Saros 10R US manual reserves at least 0.75 m height, 0.4 m width and 1.2 m depth; its diagram callouts use More than for those dimensions., 3: Roborock requires the dock location beacon to remain unblocked. | More than 1.2 m reserved depth | More than 0.75 m high | Robot route and location beacon |
| Option | Horizontal dimension | Vertical dimension | Access to preserve |
|---|---|---|---|
Front view: opening and overhead spaceUS tank dock onlyReserve more than 0.4 m in width and more than 0.75 m in height, following the stricter diagram labels. The clean-water tank must lift out; a low robot entrance alone does not provide service access. Sources: 1: The Saros 10R US manual reserves at least 0.75 m height, 0.4 m width and 1.2 m depth; its diagram callouts use More than for those dimensions., 2: The clean-water tank lifts out for filling. | More than 0.4 m wide | More than 0.75 m high | Tank removal and dock-front service |
Side view: reserved approach spaceKeep the robot route openThe prose calls for at least 1.2 m in depth and the diagram label says more than 1.2 m. Preserve that reserve and keep the dock location beacon unobstructed. Do not interpret it as permission to close the dock inside furniture. Sources: 1: The Saros 10R US manual reserves at least 0.75 m height, 0.4 m width and 1.2 m depth; its diagram callouts use More than for those dimensions., 3: Roborock requires the dock location beacon to remain unblocked. | More than 1.2 m reserved depth | More than 0.75 m high | Robot route and location beacon |
The placement prose says at least; the diagram callout labels say More than. Allow more than each stated dimension. Keep the full published depth rather than subtracting the dock body, and confirm tank, bag, tray, beacon and ventilation access.
Source notes3 references
The Saros 10R US manual reserves at least 0.75 m height, 0.4 m width and 1.2 m depth; its diagram callouts use More than for those dimensions.
support.roborock.com — source for The Saros 10R US manual reserves at least 0.75 m height, 0.4 m width and 1.2 m depth; its diagram callouts use More than for those dimensions.reserve a space of at least 0.75 m (2.46 ft) in height, 0.4 m (1.31 ft) in width and 1.2 m (3.94 ft) in depth. Make sure that the location has good WiFi coverage for a better experience with the mobile app. Plug in and make sure that the status indicator light is on. Notes: • If the power cord hangs vertically to the ground, it may be caught by the robot, causing the dock to be moved or disconnected. • The status indicator light is on when the dock is B3-1—More than 1.2 m (3.94 ft) B3-2—More than 0.75 m (2.46 ft) B3-3—More than 0.4 m (1.31 ft)
The clean-water tank lifts out for filling.
support.roborock.com — source for The clean-water tank lifts out for filling.Lift the clean water tank, open its lid, and then fill it with tap water. After filling, close the lid, lock the latch, and then put the clean water tank back to the dock.
Roborock requires the dock location beacon to remain unblocked.
support.roborock.com — source for Roborock requires the dock location beacon to remain unblocked.Keep the dock away from direct sunlight or anything that may block the dock location beacon, otherwise the robot may fail to return to the dock.
Buying limit: the exact US tank-bundle page displays “Out of stock, coming soon!” Treat this as an existing-owner sizing reference until availability is confirmed.
Alternative with explicit placement gaps: Dreame X50 Ultra
The US standard X50 Ultra manual identifies the RLX85CE robot and RCXE0105 base. Its product page lists base-station dimensions of 457 × 340 × 590 mm; retain that published order instead of assuming every maker uses the same axes.
The US manual shows more than 39″ in front and more than 2″ on each side. It calls for a location as open as possible with good Wi-Fi and no objects blocking the signaling area. The package includes a ramp extension, which the installation instructions tell you to fit: check the installed assembly before approving cabinet depth.
Tank-removal height remains unconfirmed as a numerical enclosure requirement in these sources. The manual requires removing the clean-water tank to fill it and the used-water tank to empty it; a shelf just above the closed base is not enough evidence of access. Dreame recommends placing the base on tile or marble to reduce water-stain risk on wood or carpet.
Consider it for an open location; verify the gaps, ramp and maintenance movements before buying furniture.
Station fit comparison: keep unknowns visible
Saros 10R, US tank dock
- Published dock/base dimensions
- 381 × 475 × 488 mm; maker order
- Operating space
- At least 0.75 m high, 0.4 m wide, 1.2 m deep in prose; diagram says more than
- Service-access decision
- Tank lifts out; keep cover, tray, beacon and airflow accessible
X50 Ultra, US standard base
- Published dock/base dimensions
- 457 × 340 × 590 mm; maker order
- Operating space
- More than 39″ in front; more than 2″ each side
- Service-access decision
- Numerical tank-removal height unknown; check installed ramp
Shark Matrix RV2310AE
- Published dock/base dimensions
- Complete dock dimensions unconfirmed
- Operating space
- Model-specific operating envelope unconfirmed here
- Service-access decision
- Bagless self-empty base; removal and cleaning access still need verification
Full comparison table
Swipe to compare. Row labels stay visible.
| Exact station | Published dock/base dimensions | Operating space | Service-access decision |
|---|---|---|---|
| Saros 10R, US tank dock | 381 × 475 × 488 mm; maker order | At least 0.75 m high, 0.4 m wide, 1.2 m deep in prose; diagram says more than | Tank lifts out; keep cover, tray, beacon and airflow accessible |
| X50 Ultra, US standard base | 457 × 340 × 590 mm; maker order | More than 39″ in front; more than 2″ each side | Numerical tank-removal height unknown; check installed ramp |
| Shark Matrix RV2310AE | Complete dock dimensions unconfirmed | Model-specific operating envelope unconfirmed here | Bagless self-empty base; removal and cleaning access still need verification |
Scroll horizontally to see every column
| Exact station | Published dock/base dimensions | Operating space | Service-access decision |
|---|---|---|---|
| Saros 10R, US tank dock | 381 × 475 × 488 mm; maker order | At least 0.75 m high, 0.4 m wide, 1.2 m deep in prose; diagram says more than | Tank lifts out; keep cover, tray, beacon and airflow accessible |
| X50 Ultra, US standard base | 457 × 340 × 590 mm; maker order | More than 39″ in front; more than 2″ each side | Numerical tank-removal height unknown; check installed ramp |
| Shark Matrix RV2310AE | Complete dock dimensions unconfirmed | Model-specific operating envelope unconfirmed here | Bagless self-empty base; removal and cleaning access still need verification |
Sources: Roborock overview, Saros manual, Dreame specifications, X50 manual and Shark's exact model page.
Shark lists 15.24 in L × 10.91 in W × 17.28 in H under “Product Dimensions,” without clearly identifying a dock-only, ramp-inclusive assembly. Do not use that line as the dock footprint or transfer measurements from Matrix Plus or another suffix. Bagless emptying does not supply the missing cabinet measurements.
Cabinet screened: Giantex Robot Vacuum Storage Cabinet
This is an actual furniture product with a direct maker purchase page, a reversible door and an open shelf. Giantex specifies 19.5 × 15.5 × 30″ overall, 16 × 13.5 × 23.5″ internally, both in its L × W × H order, plus 6-inch ground clearance.
Our decision: skip it for Saros 10R and X50 Ultra. Neither published station footprint fits that internal rectangle in its normal docking orientation. For a quick screen, the cabinet's longer horizontal interior edge is 16″; using NIST's exact 25.4 mm per inch, 16 × 25.4 < 457, the X50 base's longer horizontal dimension in millimeters. The Saros dock's corresponding long dimension is 475 mm, also beyond that edge.
The listed ground clearance does not specify the entire robot entrance. Giantex's product page does not document clear entrance width, cable-hole dimensions or ventilation opening area. A reversible door does not establish navigation or tank clearance. Shark fit remains unknown.
The variants are Brown JV13625BN and Grey JV13625GR; colour does not establish compatibility. The page exposes both in-stock and backorder wording: confirm the selected option's fulfillment before ordering.
Buying advice: measure the working space
Record the narrowest clear opening after hinges and trim; installed dock depth with tray or ramp; height needed to remove a tank or open a lid; and unobstructed approach. Request an assembly drawing when only exterior dimensions are supplied. Defer buying if a fit requirement remains unanswered.
Identify the exact station
Match the robot, dock, market and included bundle to its own manual.
Compare the working space
Check internal openings against placement gaps, the installed ramp and full maintenance movements.
Resolve missing evidence
Request the missing drawing or access dimension; choose an open location while the match is uncertain.
Power and signals: Roborock allows the power cord to exit either side slot and warns that a hanging cord can be caught by the robot. Dreame's manual says not to close a door on the cord. Plan a route that respects those instructions and leaves the plug accessible; a cable hole alone does not settle the fit.
Water and airflow: Dreame's storage guidance says drying docks such as X50 Ultra need ventilation and should not be sealed in airtight furniture. Do not assume a decorative door or an unspecified rear gap supplies enough airflow. Keep the tank-carrying route to your sink practical, and follow the exact manual's water and floor guidance.
Variants that change the fit
Saros tank versus refill-and-drain: Roborock's overview also describes a separate refill-and-drain version with a 30 cm-tall dock and region-dependent availability. Those installation figures do not describe the US tank bundle. Confirm the exact regional package and supported installation before considering plumbing.
X50 standard versus Complete or accessory bundles: this guide uses the standard US robot-and-base record. Check the selected box contents, including the ramp, rather than treating an accessory bundle name as a different or smaller station. Dreame's page also says water-hookup support varies by region and the kit is a separate purchase; that statement does not establish an installed US plumbing package.
Shark Matrix versus Matrix Plus: the RV2310AE page includes a Matrix robot and self-empty base; the adjacent Matrix Plus offer describes sonic mopping. Keep those packages separate when requesting dimensions.
- Yes: Keep the exact station manual and furniture drawing together when checking a fit
- Partly: Consider furniture only after every placement and service requirement is resolved
- No: Approve an enclosure from exterior dimensions, a robot-height figure or a generic compatibility claim
How we choose
We compare official product specifications, model-specific US manuals and maker storage instructions. We reused the site's exact Saros, X50 and RV2310AE identities and screened a real cabinet against those documents. This is document research, not physical fit testing. Unknown dimensions stay unknown; a manufacturer's furniture description does not certify a particular dock match. Our disclosure explains the site's purchase links.
Verdict
Keep the station openly placed unless a cabinet satisfies every documented requirement. Use Saros 10R's tank-dock instructions as the complete reserved-space example and X50 Ultra's manual for its explicit side and front gaps. Skip the screened Giantex cabinet for those stations, and leave RV2310AE enclosure fit unresolved until Shark supplies the missing station and service dimensions.
Frequently asked questions
Can you hide a robot vacuum dock inside a cabinet?
Only consider it after checking the exact station manual, ventilation and service access. Roborock's Saros 10R instructions require a hard, flat floor, an unblocked dock beacon and well-ventilated operation; Dreame warns against airtight furniture around drying docks. We have no verified cabinet match for the stations here. Keep the dock openly placed if any requirement remains unresolved.
How much space does a Roborock Saros 10R dock need?
For the US tank dock, the manual's placement text reserves at least 0.75 m height, 0.4 m width and 1.2 m depth. Its diagram labels say more than those dimensions, so plan beyond the stated values. These are reserved-space requirements, not the closed dock footprint. Do not apply the shorter refill-and-drain dock's installation figures to the tank version.
Where should I put a Dreame X50 Ultra base station?
Dreame's US manual says to use a location that is as open as possible with a good Wi-Fi signal. Its diagram calls for more than 39″ in front and more than 2″ on each side. Keep the signaling area clear. Dreame recommends tile or marble beneath the base to reduce the risk of water stains on wood or carpet.
Does the Giantex robot vacuum cabinet fit these docks?
Do not buy it for the stations in this guide. Giantex lists an internal compartment of 16 × 13.5 × 23.5 inches, in its L × W × H order. Comparing those dimensions with the published Saros and X50 dock dimensions rules those stations out. Shark does not list the RV2310AE's complete station dimensions and service envelope on its model page, so its match stays unknown.
Roborock Saros 10R, US tank bundle
Related guides

Buying guide · Robot Docks
Roborock S7 Auto-Empty Dock: Compatibility and Replacement Buying Guide
Find the documented US Roborock S7 auto-empty dock, required dustbin and bag checks. Compare dock IDs, voltage, package contents and replacement options.
Buying guide · Robot Docks
Roborock Replacement Docks: Match Your Robot Before Buying
Find the right Roborock replacement dock by robot and station label. Check US voltage, missing parts, standalone stock and complete robot-and-dock alternatives.

