Buying guide
Roborock RRE0CPS Dust Bags
Identify the Saros 20 Dock
Find the bag for Roborock RRE0CPS: identify the Saros 20 robot and US dock, check the genuine six-pack SKU, and avoid look-alike bags and regional mix-ups.
By thisSWEEP EditorialUpdated November 6, 20267 min read1 pick
On this page · The short answer
The short answer
Roborock RR-CDYCX0-QRevo-06
- Check
- The current title covers S8 MaxV Ultra, S8 Max Ultra, Qrevo, Qrevo Curv, Qrevo Edge, Saros and QV series. “Qrevo” in the URL therefore does not limit the page to the original Qrevo.
RRE0CPS identifies the Roborock Saros 20 robot; its US manual pairs it with the EWFD42LRR Empty Wash Fill Dock. For that US package, our starting pick is Roborock's genuine six-bag Qrevo/Saros pack, RR-CDYCX0-QRevo-06. The US bag listing names the Saros family rather than this dock code, so complete the label check below before ordering.
Quick picks
- US refill after matching the labels: Roborock's genuine six-pack, SKU Roborock RR-CDYCX0-QRevo-06, is our documented family-listed choice.
- Only have “RRE0CPS”? Identify the dock before choosing a bag. The US manual distinguishes robot RRE0CPS from dock EWFD42LRR.
- Shopping from the UK? Roborock documents a three-bag pack. Treat it as a regional option requiring its own model check.
Decode the robot and dock labels first
The strongest identity evidence is in the FCC/IC Statement on page 9 of the Saros 20 US manual: it names “Robotic Vacuum Cleaner Model: RRE0CPS” and “Empty Wash Fill Dock: EWFD42LRR.” The Basic Parameters section on page 16 repeats those models and rates that dock for 120 V, 60 Hz. That establishes the US robot/base pairing without turning a search keyword into a bag part number.
Photograph the robot label and the dock rating plate, retaining every letter and digit. Also keep the commercial model name, purchase region and any replacement-dock paperwork. If you need the serial number for support, the manual locates it on a sticker underneath the robot. Do not move a filled dock just to find a label: follow the manual's moving instructions if access requires repositioning it.
The robot identifier alone does not settle the regional base. Roborock's CE refill-and-drainage manual also identifies robot RRE0CPS, but its Basic Parameters section names an EWFD51HRR dock rated 220–240 V. This is a distinct documented package. If that is your label, use its regional accessory confirmation instead of applying the US pairing automatically.
Record both labels
Photograph the robot identifier and the separate dock rating plate.
Match the regional manual
Confirm the robot and dock pairing in the manual supplied for your market.
Match the replacement pack
Check the full bag SKU and the maker's compatible-model wording; ask Roborock about a different dock.
Recommended US refill: genuine six-pack Roborock RR-CDYCX0-QRevo-06
Choose this pack when the labels match the US Saros 20 package above and you want a bag refill. The official US page specifies six dust bags, and its product data identifies the SKU as RR-CDYCX0-QRevo-06. The current title covers S8 MaxV Ultra, S8 Max Ultra, Qrevo, Qrevo Curv, Qrevo Edge, Saros and QV series. “Qrevo” in the URL therefore does not limit the page to the original Qrevo.
There is a useful evidence distinction: the US page supplies family-level fit wording; it does not print EWFD42LRR in that wording. Roborock's Canadian counterpart explicitly includes Saros 20 in its compatible-model list, but its SKU is RRCA-CDYCX0-QRevo-06. That supports the model-family connection while keeping the Canadian and US order codes separate. Our US recommendation combines the manual's exact robot/dock pairing with the US accessory's Saros-family listing; it is not a claim that the US accessory page explicitly lists the dock code.
For a replacement base, imported package or any label mismatch, send Roborock the label photos and the proposed pack code before purchasing. A useful request is: “Please confirm the current US replacement-bag SKU for the robot and dock shown in these photos.” Keep the reply with your order so a future refill has the same documented starting point.
Check the genuine six-pack at Roborock.
Compare the similar-looking pack choices
These are buying routes with different evidence and regions. Pack quantity alone cannot establish that a bag fits your dock.
US Qrevo/Saros pack
- Pack and order code
- 6 bags; RR-CDYCX0-QRevo-06
- What the maker documents
- Saros-family compatibility alongside named Qrevo and S8 families
- Decision for a US EWFD42LRR owner
- Our starting pick after matching the US robot/base labels; dock code is not explicitly listed
Canadian counterpart
- Pack and order code
- 6 bags; RRCA-CDYCX0-QRevo-06
- What the maker documents
- Saros 20 appears in the compatible-model list
- Decision for a US EWFD42LRR owner
- Useful corroboration; retain the separate Canadian order code and market
UK smaller refill
- Pack and order code
- 3 bags; RRUK-CD0-QrevoS-P03-2C
- What the maker documents
- Saros-family listing; also offered with Saros 20 on the UK robot page
- Decision for a US EWFD42LRR owner
- A documented regional alternative, requiring regional confirmation for a US dock
US S7/Q5-family pack
- Pack and order code
- 6 bags; separately listed product
- What the maker documents
- Lists S7 MaxV Ultra, S7 Max Ultra, S7 Pro Ultra and other named models
- Decision for a US EWFD42LRR owner
- Saros 20 is absent from the listed compatibility; leave it out of this shortlist
Full comparison table
Swipe to compare. Row labels stay visible.
| Official option | Pack and order code | What the maker documents | Decision for a US EWFD42LRR owner |
|---|---|---|---|
| US Qrevo/Saros pack | 6 bags; RR-CDYCX0-QRevo-06 | Saros-family compatibility alongside named Qrevo and S8 families | Our starting pick after matching the US robot/base labels; dock code is not explicitly listed |
| Canadian counterpart | 6 bags; RRCA-CDYCX0-QRevo-06 | Saros 20 appears in the compatible-model list | Useful corroboration; retain the separate Canadian order code and market |
| UK smaller refill | 3 bags; RRUK-CD0-QrevoS-P03-2C | Saros-family listing; also offered with Saros 20 on the UK robot page | A documented regional alternative, requiring regional confirmation for a US dock |
| US S7/Q5-family pack | 6 bags; separately listed product | Lists S7 MaxV Ultra, S7 Max Ultra, S7 Pro Ultra and other named models | Saros 20 is absent from the listed compatibility; leave it out of this shortlist |
Scroll horizontally to see every column
| Official option | Pack and order code | What the maker documents | Decision for a US EWFD42LRR owner |
|---|---|---|---|
| US Qrevo/Saros pack | 6 bags; RR-CDYCX0-QRevo-06 | Saros-family compatibility alongside named Qrevo and S8 families | Our starting pick after matching the US robot/base labels; dock code is not explicitly listed |
| Canadian counterpart | 6 bags; RRCA-CDYCX0-QRevo-06 | Saros 20 appears in the compatible-model list | Useful corroboration; retain the separate Canadian order code and market |
| UK smaller refill | 3 bags; RRUK-CD0-QrevoS-P03-2C | Saros-family listing; also offered with Saros 20 on the UK robot page | A documented regional alternative, requiring regional confirmation for a US dock |
| US S7/Q5-family pack | 6 bags; separately listed product | Lists S7 MaxV Ultra, S7 Max Ultra, S7 Pro Ultra and other named models | Saros 20 is absent from the listed compatibility; leave it out of this shortlist |
Roborock's UK Saros 20 page also offers a maintenance kit containing 4 mop cloths, 3 dust bags, 2 filters, 1 main-brush cover, 1 main brush and 2 side brushes. That is a broader kit decision, distinct from buying only bags. Choose a kit only when its other components match your robot and you need them; its regional listing does not establish a US kit recommendation.
We have no official-source fit evidence for a third-party “RRE0CPS” multipack in this shortlist. Require a documented match to your dock before treating one as an alternative. For another robot/base combination, start with our Roborock replacement dust-bag selector.
Check the opening and pack details without guessing
Before discarding the old bag, compare its inlet opening, handle and seating edge with the maker's product photos. Use the comparison to catch an obvious mismatch; keep the model and part-code check as the basis for purchase. Our cited US accessory information does not specify collar dimensions, so we do not supply an opening measurement or claim that a similar shape proves interchangeability.
The manual's installation requirement is concrete: the new bag must go all the way into the slot and be spread evenly. Keep the complete pack code in your shopping notes. Do not substitute a bag because a listing says only “Roborock,” “Ultra” or “six-pack.” The comparison above shows why a pack count and familiar model words leave important differences unresolved.
Replace the bag and check the seal
Follow D12, Replacing Disposable Dust Bag, in the US manual. Switch off the product and unplug it before maintenance, as the manual instructs.
- Remove the dust-container cover using both hands, one on each side.
- Remove and discard the disposable bag. Its handle seals the bag on removal, according to Roborock.
- Wipe the filter with a dry cloth, insert a new disposable bag fully into the slot, and spread it evenly.
- Reinstall the cover securely so the dust container is sealed.
The bag is a disposable part: follow the remove-and-discard instruction rather than washing it. Also distinguish the dry-cloth instruction here from the separate procedures for the robot's washable filter and the cleaning-tray filter. If you are replacing a roller or brush instead, use our Roborock replacement-brush guide to identify that component separately.
- Yes: New disposable bag seated fully in its slot and spread evenly
- Yes: Dust-container cover reinstalled securely
- No: Automatic emptying with no bag installed
- Partly: If the bag is unavailable, disable auto-emptying in the app
Replacement timing and emptying problems
Roborock's instruction for this bag is “Replace as needed.” It does not assign a fixed replacement interval in the bag-maintenance section. Do not turn the number of bags in a pack into a promised supply duration.
For weak emptying or unusual noise, the manual points to incorrectly installed main brushes or their cover, and blockages in the filter, air duct, suction inlet, air inlet, dustbin or disposable bag. For no automatic emptying, check the app setting and dust-container cover. The manual also explains that returning without cleaning, returning during Do Not Disturb mode, or placing the robot on the dock manually can prevent automatic emptying. Check these causes before ordering a different bag shape.
Compare value only after confirming compatibility
At checkout, divide the live pack total by 6 for the US refill, or 3 for the UK smaller pack. Include applicable delivery charges and tax consistently, and compare offers in the same currency. For a mixed maintenance kit, avoid dividing the whole kit total by its bag count unless you intend to value every other included component at zero.
The purchase link here goes to Roborock's US store. When shopping elsewhere, check the merchant identity separately from the brand name in a title, and recheck the exact SKU, quantity, condition and return terms. Save the pack code with your dock photo for the next order.
How we choose
This is document-based research, with no physical evaluation of the bags. We use Roborock's US product page and linked FCC manual for identity, the official accessory's product data for the US SKU, and regional maker pages to explain alternatives and limits. The US family wording and Canadian exact-model wording remain separate. Only the genuine US six-pack makes our conditional US shortlist; commissions do not establish compatibility (disclosure).
Verdict
For RRE0CPS paired with the US EWFD42LRR dock, start with Roborock's six-pack RR-CDYCX0-QRevo-06 and retain the evidence limit: the US listing names the Saros family, not this dock code. If your base label differs, get an exact regional confirmation before ordering. This makes the robot label useful without mistaking it for a replacement-part number.
Frequently asked questions
What Roborock model is RRE0CPS?
RRE0CPS is the robot model identified in Roborock's Saros 20 US manual. That manual pairs it with the EWFD42LRR Empty Wash Fill Dock, rated for 120 V and 60 Hz. Record the dock identifier separately: the CE refill-and-drainage manual also names RRE0CPS but specifies a different dock, EWFD51HRR.
Which dust bags should I buy for RRE0CPS?
After confirming the US EWFD42LRR dock, our starting pick is Roborock's genuine six-pack, SKU RR-CDYCX0-QRevo-06. Its US listing names the Saros Series, while the corresponding Canadian pack explicitly lists Saros 20. The US listing does not name the dock code, so request confirmation from Roborock if your labels or replacement dock differ.
Are Qrevo dust bags the same buying choice as Saros 20 bags?
Roborock's US six-pack lists both Qrevo and Saros families on the same product page. That shared listing explains why a Qrevo-named URL can be relevant to Saros 20. Use the complete SKU and your dock label when ordering; the separate six-pack advertised for S7 MaxV Ultra and Q5 docks has a different compatibility list.
Can I wash and reuse a Saros 20 dock dust bag?
Follow the disposable-bag instructions: the Saros 20 manual says to remove and discard the old bag, then insert a new one. Its instruction to wipe the nearby filter with a dry cloth does not make the bag washable. The robot's separately identified washable filter has its own maintenance procedure.
How often should I replace the dust bag?
The Saros 20 manual says to replace the disposable bag as needed. Use that guidance rather than assigning a fixed calendar life to every bag. If emptying becomes weak or unusually noisy, the manual also identifies blocked filters, ducts, inlets, the dustbin or the bag as possible causes, so inspect the whole emptying path.
Why is my dock not emptying after I install a new bag?
Check that the bag is fully seated and the dust-container cover is installed. The manual also lists disabled auto-emptying, Do Not Disturb mode, returning without cleaning and being placed on the dock manually as reasons automatic emptying may not start. Check those settings and circumstances before concluding that the new bag is the wrong part.
Roborock RR-CDYCX0-QRevo-06
Related guides

Buying guide · Bags & Filters
Eufy Robot Vacuum Filters: How to Change and Match the Right Part
Change your eufy robot vacuum filter and choose the correct replacement. Compare 11S MAX, original 11S, G30 revisions and X10 Pro Omni filter packs and kits.

Buying guide · Bags & Filters
Roborock QV 35A Dust Bags: The Genuine Pack and Dock Check
Find the genuine Roborock QV 35A dust bag pack, check robot and dock labels, avoid the similar Q5 bags, and follow the official replacement and fault checks.

Buying guide · Bags & Filters
Roborock Replacement Dust Bags: Match Robot and Dock First
Find the right Roborock replacement dust bags by robot and dock. Compare genuine six-packs, check Qrevo and Pure variants, and avoid ordering an unverified fit.